| Citation: |
XIN Lei, HU Jing. Design of fault location system for belt conveyor transmission mechanism[J]. Journal of Mine Automation, 2024, 50(S1): 122-125,138.
|
| [1] |
李炜, 黄倩.面向机械设备维护的故障自动化诊断系统设计[J].制造业自动化, 2021, 43(4):145-148.
|
| [2] |
张华伟, 邱庆华.胶带机软启动及功率平衡系统的设计与仿真[J].中州煤炭, 2011(3):3-5, 12.
|
| [3] |
孙超, 李萌, 董国创.X型液体火箭发动机试车综合测控系统[J].火箭推进, 2021, 47(3):98-106.
|
| [4] |
叶日良.CAN总线协议及其自动化测试系统的设计与研究[D].广州:华南理工大学, 2021.
|
| [5] |
高晋, 田慕琴, 许春雨, 等.基于双CAN总线的薄煤层液压支架电液控制系统研究[J].煤炭工程, 2020, 52(1):143-147.
|
| [6] |
张喆, 陶云春, 梁睿, 等.一种带式输送机故障诊断方法[J].工矿自动化, 2020, 46(4):81-84, 108.
|
| [7] |
曾武, 阳卫伟, 袁雄兵.基于CAN总线的伺服电机控制系统设计[J].计算技术与自动化, 2020, 39(2):21-24.
|
| [8] |
王浩楠, 张晓青, 郭阳宽, 等.基于机器视觉的轮胎胶料表面字符识别[J].电子测量与仪器学报, 2021, 35(1):191-199.
|
| [9] |
顾雯雯, 王丹.基于嵌入式系统的起重机倾角检测装置[J].起重运输机械, 2021(13):68-71.
|
| [10] |
邓轲, 陈伟, 赵强, 等.一种基于CAN总线的编码器采集电路设计[J].航空计算技术, 2020, 50(5):120-123.
|
| [11] |
张承森.带式输送机噪声来源分析及降噪方法研究[J].煤炭科学技术, 2017, 45(增刊2):101-103.
|
| [12] |
贾志鹏.带式输送机低噪音托辊性能特性研究[D].太原:太原科技大学, 2021.
|
| [13] |
李席岳.主斜井煤矿带式输送机动态特性研究[J].机械研究与应用, 2023, 36(3):140-142.
|
| [14] |
刘尧青.带式输送机降噪优化设计研究[J].机械管理开发, 2021, 36(9):325-326.
|
| [15] |
李篪, 陈长征.基于ICEEMDAN的滚动轴承声信号故障诊断方法[J].沈阳工业大学学报, 2023, 45(6):672-679.
|
| [16] |
闫景涛, 缪立军, 毛建峰, 等.高斯白噪声相位调制的激光光谱展宽[J].光谱学与光谱分析, 2022, 42(3):665-671.
|
| [17] |
曾武, 阳卫伟, 袁雄兵.基于CAN总线的伺服电动机控制系统设计[J].计算技术与自动化, 2020, 39(2):21-24.
|
| [18] |
李国号.配电自动化主站系统负荷转供协调控制方法研究[J].科技通报, 2020, 36(11):84-88.
|
| [19] |
董海涛, 张帅涛, 冯建强.基于模拟伺服的多轴EtherCAT协议设计[J].仪表技术与传感器, 2023(2):69-72, 77.
|
| [20] |
张啸天, 倪屹, 郭瑜, 等.基于ARM的化学发光免疫分析仪控制系统[J].传感器与微系统, 2021, 40(2):76-78, 82.
|
| [21] |
WANYong, FENG Xiunan, CHEN Yixuan, et al.A dual detection method for siemens inverter motor modbus RTU attack[J].Computer And Communications, 2021, 9(7):91-108.
|
| [1] | GAO Xu-bi. A software design method of Modbus protocol based on MSP430 single-chip microcomputer[J]. Journal of Mine Automation, 2013, 39(4): 87-90. |
| [2] | YIN Shao-jie, SUN Jin-sheng, SUN Huai-xiang. Design of Gateway in Fault Location System of Belt Conveyor[J]. Journal of Mine Automation, 2012, 38(2): 71-75. |
| [3] | LIU Guo-peng, JIA You-sheng, ZHANG Bo, WU Peng. Application of CANopen Protocol in Electrical Control System of Coal Mine Excavating Equipment[J]. Journal of Mine Automation, 2011, 37(9): 10-13. |
| [4] | DAI Yue, MIAO Chang-yun, RONG Feng. Design of Bootloader Based on MicroBlaze Soft Core Processor[J]. Journal of Mine Automation, 2009, 35(11): 20-23. |
| [5] | LU Xing-mi. Design of Software of Monitoring and Control Substation of Power Supply Monitoring and Control System in Coal Mine Underground Based on Virtual Instrument[J]. Journal of Mine Automation, 2009, 35(8): 94-97. |
| [8] | XIONG Xing-ming. Discussion on Method and Skill of Economizing I/O of PLC by the Design of Software and Hardware[J]. Journal of Mine Automation, 2005, 31(3): 56-58. |
| [9] | WEI Jian-ping~(, 2), WANG En-yuan~, HE Xue-qiu~. Development of Continuous Monitoring Software of Electromagnetic Radiation of Coal or Rock[J]. Journal of Mine Automation, 2004, 30(3): 1-3. |
| [10] | FENG Lin-qiao , YI Ming , WU Rui . Microcomputer based CAD System for Mine Electricity Grids[J]. Journal of Mine Automation, 2000, 26(1): 1-4. |
| 1. |
齐泽中，周俊，叶子渭，周学剑，杨浩勇. 单侧制动式转向履带底盘自主行走局部路径规划方法. 农业机械学报. 2024(06): 52-59 .
| |
| 2. |
王文明. 随钻取心成套装备的研发及现场应用. 矿业安全与环保. 2023(04): 97-104 .
| |
| 3. |
高启业，高明，宋丽军. 履带行走车辆行走轨迹纠偏方法研究. 中国工程机械学报. 2023(06): 527-531 .
|
Supported by: Beijing Renhe Information Technology Co.,
Ltd. Visits：1207871
DownLoad: