WANG Run-sheng, KANG Zhi-qiang, ZHOU Rui-long, YU Yang, GUO Jian-wen. Simulation Research of Bolt Supporting of Physical Tunnel in Tectonic Stress Field Based on ANSYS[J]. Journal of Mine Automation, 2010, 36(1): 32-36.
Citation: WANG Run-sheng, KANG Zhi-qiang, ZHOU Rui-long, YU Yang, GUO Jian-wen. Simulation Research of Bolt Supporting of Physical Tunnel in Tectonic Stress Field Based on ANSYS[J]. Journal of Mine Automation, 2010, 36(1): 32-36.

Simulation Research of Bolt Supporting of Physical Tunnel in Tectonic Stress Field Based on ANSYS

More Information
  • A software for aided designing bolt of tunnel named ANSYSBOLT was designed on the basis of ANSYS finite element software. In the software environment, bolt supporting model of physical tunnel in tectonic stress field was structured according to physical parameters of coal and rock seam of some working face, and in conditions of different buried depth, bolt supporting structure and pre-tightening force, distributions of stress of surrounding rock of physical tunnel and its displacement were analyzed and calculated by ANSYSBOLT software. Then influence of different buried depth, bolt supporting structure and pre-tightening force on stability of roof and floor of tunnel was analyzed and finally feasible scheme of bolt supporting was gotten according to the analysis result. The field test result showed the above method is feasible and reliable.
  • Related Articles

    [1]GAO Jian. Stability evaluation of waste dump based on numerical simulation[J]. Journal of Mine Automation, 2024, 50(S2): 76-78,81.
    [2]SHI Yinbi. Research on numerical simulation and optimization of ventilation rate in Wuhushan Coal Mine[J]. Journal of Mine Automation, 2021, 47(S1): 75-77.
    [3]LIU Tianqi. Numerical simulation of flame propagation characteristics of coal-dust explosion in horizontal pipeline space[J]. Journal of Mine Automation, 2019, 45(7): 59-65. DOI: 10.13272/j.issn.1671-251x.2019020008
    [4]ZHANG Xiaoyi, WANG Deming, YANG Xuehua. Numerical simulation of cable fire in coal mine chamber[J]. Journal of Mine Automation, 2019, 45(3): 52-55. DOI: 10.13272/j.issn.1671-251x.2018060049
    [5]WEI Fengqing, CHENG Peidong, ZHANG Junxiang, DU Xiaoqi. Study on numerical simulation of effective drainage radius of drilling hole in coal seam[J]. Journal of Mine Automation, 2016, 42(7): 25-29. DOI: 10.13272/j.issn.1671-251x.2016.07.007
    [6]WANG Bo, SONG Yubin, WANG Xin. Goal driven optimization design of flameproof shell based on ANSYS Workbench[J]. Journal of Mine Automation, 2015, 41(12): 70-72. DOI: 10.13272/j.issn.1671-251x.2015.12.019
    [7]QI Dexin, ZHANG Baogang, LI Dongxiao. Improvement of magnetic barriers structure of permanent magnet synchronous motor based on ANSYS[J]. Journal of Mine Automation, 2014, 40(10): 102-105. DOI: 10.13272/j.issn.1671-251x.2014.10.028
    [8]HU Wan-qing, HU Qing-yi, LIN Xue, LIN Shan-ming. Research of temperature monitoring system for cable joint based on temperature field[J]. Journal of Mine Automation, 2013, 39(6): 90-93.
    [9]HAO Chang-sheng, WANG Hong-sheng, PANG Run-fang. Research of Numerical Simulation of Process of Mine Gas Pre-draining by Pinnate Boring[J]. Journal of Mine Automation, 2009, 35(10): 32-35.
    [10]LI Jin-kui, LIU Dong-sheng, LI Xue-bin, XIONG Zhen-hua. Numerical Simulation Research of Pressure Relief Mechanism of Borehole of Small Pillar Stress Concentrated Areas[J]. Journal of Mine Automation, 2009, 35(6): 1-4.

Catalog

    Article Metrics

    Article views (71) PDF downloads (11) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return