Citation: | ZHANG Xuhui, WANG Heng, SHEN Qifeng, et al. Improvement of position and posture measurement system for boom-type roadheader based on machine vision[J]. Journal of Mine Automation,2022,48(5):58-64. doi: 10.13272/j.issn.1671-251x.2021100051 |
[1] |
王国法,刘峰,孟祥军,等. 煤矿智能化(初级阶段)研究与实践[J]. 煤炭科学技术,2019,47(8):1-36.
WANG Guofa,LIU Feng,MENG Xiangjun,et al. Research and practice on intelligent coal mine construction (primary stage)[J]. Coal Science and Technology,2019,47(8):1-36.
|
[2] |
葛世荣. 煤矿机器人现状及发展方向[J]. 中国煤炭,2019,45(7):18-27. doi: 10.3969/j.issn.1006-530X.2019.07.004
GE Shirong. Present situation and development direction of coal mine robots[J]. China Coal,2019,45(7):18-27. doi: 10.3969/j.issn.1006-530X.2019.07.004
|
[3] |
王国法,王虹,任怀伟,等. 智慧煤矿2025情景目标和发展路径[J]. 煤炭学报,2018,43(2):295-305.
WANG Guofa,WANG Hong,REN Huaiwei,et al. 2025 scenarios and development path of intelligent coal mine[J]. Journal of China Coal Society,2018,43(2):295-305.
|
[4] |
杨健健,张强,王超,等. 煤矿掘进机的机器人化研究现状与发展[J]. 煤炭学报,2020,45(8):2995-3005.
YANG Jianjian,ZHANG Qiang,WANG Chao,et al. Status and development of robotization research on roadheader for coal mines[J]. Journal of China Coal Society,2020,45(8):2995-3005.
|
[5] |
张超,张旭辉,杜昱阳,等. 基于双目视觉的悬臂式掘进机位姿测量技术研究[J]. 煤炭科学技术,2021,49(11):225-235.
ZHANG Chao,ZHANG Xuhui,DU Yuyang,et al. Pose measurement technology of cantilever roadheader based on binocular vision[J]. Coal Science and Technology,2021,49(11):225-235.
|
[6] |
薛光辉,张云飞,候称心,等. 基于激光靶向扫描的掘进机位姿测量方法[J]. 煤炭科学技术,2020,48(11):19-25.
XUE Guanghui,ZHANG Yunfei,HOU Chenxin,et al. Measurement of roadheader position and posture based on orientation laser scanning[J]. Coal Science and Technology,2020,48(11):19-25.
|
[7] |
贾文浩,陶云飞,张敏骏,等. 基于iGPS的煤巷狭长空间中掘进机绝对定位精度研究[J]. 仪器仪表学报,2016,37(8):1920-1926. doi: 10.3969/j.issn.0254-3087.2016.08.025
JIA Wenhao,TAO Yunfei,ZHANG Minjun,et al. Research on absolute positioning accuracy of roadheader based on indoor global positioning system in narrow and long coal tunnel[J]. Chinese Journal of Scientific Instrument,2016,37(8):1920-1926. doi: 10.3969/j.issn.0254-3087.2016.08.025
|
[8] |
刘超,符世琛,成龙,等. 基于TSOA定位原理混合算法的掘进机位姿检测方法[J]. 煤炭学报,2019,44(4):1255-1264.
LIU Chao,FU Shichen,CHENG Long,et al. Pose detection method based on hybrid algorithm of TSOA positioning principle for roadheader[J]. Journal of China Coal Society,2019,44(4):1255-1264.
|
[9] |
毛清华,张旭辉,马宏伟,等. 多传感器信息的悬臂式掘进机空间位姿监测系统研究[J]. 煤炭科学技术,2018,46(12):41-47.
MAO Qinghua,ZHANG Xuhui,MA Hongwei,et al. Study on spatial position and posture monitoring system of boom-type roadheader based on multi sensor information[J]. Coal Science and Technology,2018,46(12):41-47.
|
[10] |
杜雨馨,刘停,童敏明,等. 基于机器视觉的悬臂式掘进机机身位姿检测系统[J]. 煤炭学报,2016,41(11):2897-2906.
DU Yuxin,LIU Ting,TONG Minming,et al. Pose measurement system of boom-type roadheader based on machine vision[J]. Journal of China Coal Society,2016,41(11):2897-2906.
|
[11] |
马宏伟,王世斌,毛清华,等. 煤矿巷道智能掘进关键共性技术[J]. 煤炭学报,2021,46(1):310-320.
MA Hongwei,WANG Shibin,MAO Qinghua,et al. Key common technology of intelligent heading in coal mine roadway[J]. Journal of China Coal Society,2021,46(1):310-320.
|
[12] |
杨文娟,张旭辉,马宏伟,等. 悬臂式掘进机机身及截割头位姿视觉测量系统研究[J]. 煤炭科学技术,2019,47(6):50-57.
YANG Wenjuan,ZHANG Xuhui,MA Hongwei,et al. Research on position and posture measurement system of body and cutting head for boom-type roadheader based on machine vision[J]. Coal Science and Technology,2019,47(6):50-57.
|
[13] |
张旭辉,赵建勋,杨文娟,等. 悬臂式掘进机视觉导航与定向掘进控制技术[J]. 煤炭学报,2021,46(7):2186-2196.
ZHANG Xuhui,ZHAO Jianxun,YANG Wenjuan,et al. Vision-based navigation and directional heading control technologies of boom-type roadheader[J]. Journal of China Coal Society,2021,46(7):2186-2196.
|
[14] |
刘伟华. 基于机器视觉的煤尘在线检测系统关键技术研究[D]. 济南: 山东大学, 2011.
LIU Weihua. Research on key technologies in on-line system for coal dust partical detection based on machine vision[D]. Jinan: Shandong University, 2011.
|
[15] |
纪大波,方晓,曹廷校,等. 基于图像处理测量露天爆破粉尘量[J]. 工程爆破,2017,23(4):34-38. doi: 10.3969/j.issn.1006-7051.2017.04.007
JI Dabo,FANG Xiao,CAO Tingxiao,et al. Measuring dust amount of open-pit blasting based on image processing[J]. Engineering Blasting,2017,23(4):34-38. doi: 10.3969/j.issn.1006-7051.2017.04.007
|
[16] |
闵武国. CCD成像电子学系统自动曝光和自动增益研究[D]. 大连: 大连海事大学, 2010.
MIN Wuguo. The study of auto-exposure and auto-gain on CCD imaging electronics system[D]. Dalian: Dalian Maritime University, 2010.
|
[17] |
刘志博,朱志鹏,何超,等. 微纳级示踪粒子图像灰度与粒径量化关系研究[J]. 光学学报,2020,40(8):80-86.
LIU Zhibo,ZHU Zhipeng,HE Chao,et al. Research on quantitative relationship between image gray value and particle diameter of micro-nano-scale tracer particle[J]. Acta Optica Sinica,2020,40(8):80-86.
|