ZHANG Guilin, WANG Yiying, LIU Jiangong, CHEN Longfei, LIU Wenzhuang. Mine inverter based on isolation and transformation of power electronic transformer[J]. Journal of Mine Automation, 2021, 47(10): 70-76. DOI: 10.13272/j.issn.1671-251x.2020110059
Citation: ZHANG Guilin, WANG Yiying, LIU Jiangong, CHEN Longfei, LIU Wenzhuang. Mine inverter based on isolation and transformation of power electronic transformer[J]. Journal of Mine Automation, 2021, 47(10): 70-76. DOI: 10.13272/j.issn.1671-251x.2020110059

Mine inverter based on isolation and transformation of power electronic transformer

More Information
  • Published Date: October 19, 2021
  • At present, the mine inverter and the power frequency transformer are placed separately, which occupies too much underground working space. And the inverter output voltage has high harmonic content and poor waveform quality. In order to solve the above problems, the theoretical relationship between transformer operating frequency and volume is analyzed. It is concluded that under the same transmission power, the high-frequency transformer has a more streamlined size, smaller volume and higher power density compared with the operating frequency transformer. The intermediate filter capacitor in the common topology is replaced by power electronic transformer (DC-DC converter containing high frequency transformer). The paper proposes a composite mine inverter topology based on power electronic transformer isolation and transformation. The number of fully controlled switching devices IGBT in this topology is only half of the total number of power devices, which makes the inverter structure more compact and smaller, reduces the inverter switching losses, reduces hardware complexity and production costs, and improves efficiency and reliability. The control strategies of the three-phase rectifier input stage, the intermediate isolation transformer transmission stage and the three-phase variable frequency output stage in this topology are given. The fast space vector pulse width modulation (SVPWM) algorithm in 120° coordinate system is used to control the output stage to output the ideal variable frequency three-phase symmetric sinusoidal AC voltage. The steady-state and dynamic characteristics of the inverter at all levels are analyzed through simulation and experiment. The results show that the inverter can realize the secondary conversion of the inverter output and voltage level, and the output voltage regulation range is more flexible. The fast SVPWM algorithm in 120° coordinate system reduces the output voltage harmonic content, and the output three-phase voltage waveform is good.
  • Related Articles

    [1]ZHANG Kexue, ZHANG Liya, LI Chenxin, WEI Chunxian, GAO Peng. Research on neighbor control method for electric-hydraulic control devices based on 5G[J]. Journal of Mine Automation, 2024, 50(S1): 165-168.
    [2]LI Qiwei. Design of wireless pressure sensor of hydraulic support based on LoRa technology[J]. Journal of Mine Automation, 2020, 46(12): 111-115. DOI: 10.13272/j.issn.1671-251x.2020040021
    [3]LI Junshi. Development of automatic test platform of electro-hydraulic control system of hydraulic support[J]. Journal of Mine Automation, 2018, 44(4): 13-19. DOI: 10.13272/j.issn.1627-251x.2017110051
    [4]NIU Yicun. Dynamic correlation technology of wireless control device for hydraulic support[J]. Journal of Mine Automation, 2018, 44(3): 26-30. DOI: 10.13272/j.issn.1671-251x.2017100071
    [5]HU Liang. Design of wireless pressure monitoring system of hydraulic support with low power consumptio[J]. Journal of Mine Automation, 2017, 43(6): 83-86. DOI: 10.13272/j.issn.1671-251x.2017.06.020
    [6]YANG Hanhong, MENG Feng. Research on automatic detection device of hydraulic support controller[J]. Journal of Mine Automation, 2017, 43(1): 13-17. DOI: 10.13272/j.issn.1671-251x.2017.01.004
    [7]JIANG Chunyue, TIAN Muqin, SONG Jiancheng, XU Chunyu, YANG Shihua, CHAI Wen, YANG Dong, DONG Guangzhuai. Design of hydraulic support controller for automatic working face[J]. Journal of Mine Automation, 2014, 40(9): 1-5. DOI: 10.13272/j.issn.1671-251x.2014.09.001
    [8]WANG Tao, LIU Xiaowen, QIAO Xin, ZONG Xin. Design of pressure monitoring system of hydraulic support based on wireless sensor network[J]. Journal of Mine Automation, 2014, 40(6): 7-10. DOI: 10.13272/j.issn.1671-251x.2014.06.002
    [9]CHU Yan-ju. Research of Synchronously Automatic Control of Grouped Multi-hydraulic Supports Based on PM31 System[J]. Journal of Mine Automation, 2011, 37(6): 73-75.
    [10]HAO Tie-shua. Automatic Control System of Hydraulic Support Based on S7-300 PLC[J]. Journal of Mine Automation, 2010, 36(12): 78-80.
  • Cited by

    Periodical cited type(3)

    1. 樊鹏飞. 矿用液压支架控制器的设计与实现. 机械管理开发. 2022(02): 271-272+275 .
    2. 文小燕. 液压控制器的设计与实现. 自动化与仪器仪表. 2020(03): 152-155 .
    3. 刘海全. 手持液压支架用无线遥控装置设计. 煤矿机械. 2018(06): 23-25 .

    Other cited types(0)

Catalog

    Article Metrics

    Article views (120) PDF downloads (20) Cited by(3)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return