WANG He, CHEN Jing, TENG Yingyao. Path planning of mine robot based on a novel heuristic algorithm with regular hexagon grids[J]. Journal of Mine Automation, 2020, 46(8): 64-69. DOI: 10.13272/j.issn.1671-251x.2020020003
Citation: WANG He, CHEN Jing, TENG Yingyao. Path planning of mine robot based on a novel heuristic algorithm with regular hexagon grids[J]. Journal of Mine Automation, 2020, 46(8): 64-69. DOI: 10.13272/j.issn.1671-251x.2020020003

Path planning of mine robot based on a novel heuristic algorithm with regular hexagon grids

More Information
  • In the traditional square grid map, when robot encounters an obstacle, it is easy to collide with the obstacle when moving along diagonal direction, has poor capability in obstacle-avoiding and stability, and time consumed in each step during real-time detection cannot be uniquely determined. In view of the above problems, based on working environment of regular hexagon grid, a path optimization method for multiple parallel mobile mine robots by using improved heuristic path search algorithm is proposed. In this paper, a comparative analysis of single robot in square and regular hexagon grid modeling environment is carried out from three aspects of obstacle-avoiding angle, obstacle-avoiding ability and optimal path. The results show that for a single robot, path length cost under regular hexagon grid map is less than that in square grid map, and from path planning of a single robot, regular hexagon grid map is more conducive to obtain the shortest path, so it is concluded that regular hexagon grid is more suitable for robot working environment modeling than traditional square grid. Aiming at path planning problem of parallel movement of multiple robots in collaborative operation, an improved heuristic path search algorithm is used to optimize path of multiple robots on the basis of working environment of regular hexagon grid:Multiple collaborative robot paths are planned by use of improved heuristic estimation function, which determines the one of all adjacent grids around the current robot location to be traversed by the robot. The improved heuristic estimation function is used to plan the path of multiple cooperative robots. According to the number of grids traversed by robot and deformed Manhattan distance between candidate grid and target grid of the robot, the heuristic estimation function can evaluate fitness value of adjacent grids. The simulation results show that total path length and running time of the algorithm are reduced by more than 10% compared with the square grid map, collision between the robot and static obstacles and among the robots is effectively avoided, and safety of the robot is improved. With increase of the number of robots, the improved heuristic path search algorithm has more obvious optimization effect on robot path and algorithm running time under the regular hexagon grid map.
  • Related Articles

    [1]LIU Peng, ZHOU Haochen, MA Hongwei, CAO Xiangang, ZHANG Xuhui, DUAN Xuechao, MAO Qinghua, TIAN Haibo, XUE Xusheng, WANG Chuanwei. Relative dynamics modeling and force-position hybrid control of dual-arm cutting robot[J]. Journal of Mine Automation, 2024, 50(10): 80-89. DOI: 10.13272/j.issn.1671-251x.2024070104
    [2]FENG Junling, TIAN Muqin, HE Ying, WANG Xi. Simulation analysis on influencing factors of cutting head load of longitudinal roadheader[J]. Journal of Mine Automation, 2020, 46(5): 21-27. DOI: 10.13272/j.issn.1671-251x.2019090068
    [3]GOU Yong, WANG Ke. Research on dynamic mechanical properties and transient magnetic field characteristics of composite coal and rock mass[J]. Journal of Mine Automation, 2019, 45(7): 86-91. DOI: 10.13272/j.issn.1671-251x.2019010099
    [4]LI Lei, WANG Yiliang, YANG Zhaojian. Transient dynamics and modal analysis of rocker shell of shearer[J]. Journal of Mine Automation, 2018, 44(6): 86-89. DOI: 10.13272/j.issn.1671-251x.2017100041
    [5]ZHANG Yu, CHEN Hongyue, HAO Zhiyong, MAO Jun. Dynamics characteristics analysis of coal plow system under starting and braking conditio[J]. Journal of Mine Automation, 2018, 44(3): 59-65. DOI: 10.13272/j.issn.1671-251x.2017050022
    [6]ZENG Yuexiang, YANG Zhaojian, WANG Shuping, XIE Jiacheng, WEN Yi. Dynamics analysis of vertical rescue vehicle-mounted hoisting system under typical working conditions[J]. Journal of Mine Automation, 2017, 43(12): 44-47. DOI: 10.13272/j.issn.1671-251x.2017.12.009
    [7]ZHANG Yanliang, LIU Yaonan, WANG Jinfeng. Research of efficiency of coal mine production logistics system based on system dynamics[J]. Journal of Mine Automation, 2016, 42(1): 40-44. DOI: 10.13272/j.issn.1671-251x.2016.01.012
    [8]WANG Jinfeng, ZHANG Bo, FENG Lijie, ZHAI Xueqi. System dynamics modeling and demonstration of safety level of production logistics of coal mine[J]. Journal of Mine Automation, 2014, 40(8): 34-38. DOI: 10.13272/j.issn.1671-251x.2014.08.009
    [9]WANG Wei-qin, LI Xiao-ming, TIAN Mu-qin, SONG Jian-cheng, WANG Wei, YAN Li. Design of dynamic load identification device for cutting mechanism of rock roadheader[J]. Journal of Mine Automation, 2013, 39(9): 16-20. DOI: 10.7526/j.issn.1671-251X.2013.09.005
    [10]SHI Li-chen, DUAN Zhi-sha. Dynamic Modeling and Analysis for Loose Joint between Crank and Linkage of Membrane Pump[J]. Journal of Mine Automation, 2009, 35(12): 73-76.
  • Cited by

    Periodical cited type(6)

    1. 王军亮. 纵轴式掘进机的横向和纵向随机振动响应分析. 矿业装备. 2024(05): 177-179 .
    2. 何洋,李晓豁,席亚兵. 纵轴式掘进机截割头振动特性分析. 机械设计与研究. 2023(02): 176-181 .
    3. 宗凯,符世琛. 大倾角巷道掘进机截割过程整机滑移的力学模型. 黑龙江科技大学学报. 2020(04): 404-410 .
    4. 宗凯,符世琛,王鹏江. 倾斜煤层掘进机整机姿态的动力学模型与响应. 黑龙江科技大学学报. 2020(05): 505-510 .
    5. 刘辉,靳帅. 不同工况下掘进机水平方向振动特性分析. 机械设计与研究. 2020(05): 198-202+207 .
    6. 闫兴发. 探究掘进机自动化截割技术. 山东工业技术. 2019(14): 67 .

    Other cited types(4)

Catalog

    Article Metrics

    Article views (103) PDF downloads (16) Cited by(10)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return