GUO Yongcun, CHEN Jiankang, HU Kun, WANG Pengyu, WANG Shuang, FANG Cheng. Research on characteristics of air gap of speed-regulation magnet coupler under condition of constant load[J]. Journal of Mine Automation, 2017, 43(11): 74-79. DOI: 10.13272/j.issn.1671-251x.2017.11.015
Citation: GUO Yongcun, CHEN Jiankang, HU Kun, WANG Pengyu, WANG Shuang, FANG Cheng. Research on characteristics of air gap of speed-regulation magnet coupler under condition of constant load[J]. Journal of Mine Automation, 2017, 43(11): 74-79. DOI: 10.13272/j.issn.1671-251x.2017.11.015

Research on characteristics of air gap of speed-regulation magnet coupler under condition of constant load

More Information
  • Taking axial permanent magnet asynchronous speed-regulation magnetic coupler as research object, a mathematical model of output speed and air gap of speed-regulation magnetic coupler was built based on magnetic circuit method, characteristics of the air gap of magnetic coupler were analyzed, relation between the air gap and output speed of the magnetic coupler under condition of constant load was studied, and variation law of corresponding output speed with different air gaps of the magnetic coupler was obtained: with increasing of the air gap between copper disc and permanent magnet disc, output speed of the magnetic coupler decreases; when the air gap increases linearly from 2.5 mm to 12.5 mm, the output speed decreases gradually from 773 r/min to 723 r/min; when the load torque keeps constant, with increasing of the air gap, power loss increases gradually, and when the air gap increases linearly from 2.5 mm to 12.5 mm, the experimental power loss gradually increases from 565 W to 1 613 W. In actual operation, power loss can be reduced by reducing the air gap properly. The results of the research have a certain guiding significance for the output speed control of the speed-regulation magnetic coupler under condition of constant load.
  • Related Articles

    [1]LI Xiaoliang, YAN Li, LIU Zhentang, LIU Haoxiong, QIAN Jifa, . Analysis of combustion duration and residual gas in secondary explosion of coal dust[J]. Journal of Mine Automation, 2018, 44(11): 62-68. DOI: 10.13272/j.issn.1671—251x.2018040085
    [2]ZHANG Yanliang, LIU Yaonan, WANG Jinfeng. Research of efficiency of coal mine production logistics system based on system dynamics[J]. Journal of Mine Automation, 2016, 42(1): 40-44. DOI: 10.13272/j.issn.1671-251x.2016.01.012
    [3]TIAN Feng, FANG Haifeng, LI Yunwang. Research of energy efficiency model of mine rescue robot[J]. Journal of Mine Automation, 2014, 40(10): 15-18. DOI: 10.13272/j.issn.1671-251x.2014.10.005
    [4]MIAO Jingli, YU Xiang. Research of active disturbance rejection control for efficiency optimization of induction motors[J]. Journal of Mine Automation, 2014, 40(9): 79-83. DOI: 10.13272/j.issn.1671-251x.2014.09.019
    [5]ZHANG Ka, FANG Lei, CAO Xiaodong. MTPA-DTC efficiency optimization method for feeding system of pressure filter[J]. Journal of Mine Automation, 2014, 40(8): 39-42. DOI: 10.13272/j.issn.1671-251x.2014.08.010
    [6]SUN Wen, ZHANG Xinghua. Efficiency optimization of direct torque control for permanent magnet synchronous motor[J]. Journal of Mine Automation, 2014, 40(3): 56-59. DOI: 10.13272/j.issn.1671-251x.2014.03.016
    [7]TAN Da-ke. Research of Relationship between Reading Card Efficiency and Distance of EPC Gen2 System[J]. Journal of Mine Automation, 2012, 38(2): 16-18.
    [8]ZHANG Song. Optimal Control for Combustion System of Middle and Small Pulverized Coal Boiler[J]. Journal of Mine Automation, 2011, 37(3): 98-101.
    [9]SUN Xi-rui, LI Ying-jia. Design of High-efficiency Miner's Lamp[J]. Journal of Mine Automation, 2008, 34(3): 121-122.
    [10]JIANG Lei, LIU Fang-hua. The Research of Bridge Circuit with Constant Temperature Detection of Catalyst Combustion Methane Sensor[J]. Journal of Mine Automation, 2006, 32(6): 14-16.
  • Cited by

    Periodical cited type(6)

    1. 侯博. 硬岩桩基成孔技术研究. 凿岩机械气动工具. 2025(01): 147-149 .
    2. 陈立新,付玉平,李川田. 多煤层重复采动条件下大巷底鼓破坏规律研究. 能源与节能. 2025(02): 59-63 .
    3. 刘静波. 重复采动下采场围岩应力响应特征研究. 山东煤炭科技. 2024(09): 112-116+127 .
    4. 解嘉豪,崔峰,韩刚,苌玉,刘虎,郝晓琦. 深埋煤层临空面开采覆岩结构失稳机理与防治技术. 西安科技大学学报. 2024(06): 1050-1059 .
    5. 王雪江,陈虎斌. 开拓煤业兼并重组原主扇匹配性分析及主扇选型研究. 当代化工研究. 2022(13): 80-82 .
    6. 冯超. 矿井通风系统优化及主扇改造技术研究. 当代化工研究. 2022(19): 176-178 .

    Other cited types(5)

Catalog

    Article Metrics

    Article views (27) PDF downloads (9) Cited by(11)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return