Volume 41 Issue 8
Turn off MathJax
Article Contents
Abstract
Related Articles
LI Baolin, WANG Enyuan, LI Nan, GAO Qinqiong, ZHOU Ming. Characteristic analysis of acoustic emission monitoring signal in coal seam hydraulic fracturing[J]. Journal of Mine Automation, 2015, 41(8): 38-42. DOI: 10.13272/j.issn.1671-251x.2015.08.010
Citation: LI Baolin, WANG Enyuan, LI Nan, GAO Qinqiong, ZHOU Ming. Characteristic analysis of acoustic emission monitoring signal in coal seam hydraulic fracturing[J]. Journal of Mine Automation, 2015, 41(8): 38-42. DOI: 10.13272/j.issn.1671-251x.2015.08.010
shu

Characteristic analysis of acoustic emission monitoring signal in coal seam hydraulic fracturing

  • 1.

    Key Laboratory of Gas and Fire Control for Coal Mines, China University of Mining and Technology, Xuzhou 221116, China

  • 2.

    School of Safety Engineering, China University of Mining and Technology, Xuz

More Information
    Graphical Abstract
    • Abstract
  • In order to promote application of acoustic emission monitoring technology in effect evaluation of coal seam hydraulic fracturing, coal seam hydraulic fracturing process was monitored by use of coal and rock dynamic disaster acoustoelectric monitor, and characteristics of acoustic emission signals collected in the process were analyzed through fourier transformation and wavelet packet analysis. The field test results show that main frequency of effective acoustic emission signals of coal seam hydraulic fracturing is in 470-1 700 Hz, which is lower than main frequency of underground noise interference signal. Energy distribution of the effective acoustic emission signals of coal seam hydraulic fracturing is concentrated in 0-5 000 Hz with proportion 86.5%-95.4%, and the energy distribution of effective signals is concentrated in low frequency band such as 312.5-625, 625-937.5, 937.5-1 250, 1 875-2 187.5 Hz.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]PAN Wenlong, LI Shengjun, GAO Quanjun, YANG Luyu, LIU Qingfu, ZHANG Heming. Research on information model of coal mine fully mechanized mining equipment based on industrial Internet[J]. Journal of Mine Automation, 2024, 50(5): 84-92. DOI: 10.13272/j.issn.1671-251x.2024010022
    [2]CAO Xiangang, DUAN Yong, ZHAO Jiangbin, YANG Xin, ZHAO Fuyuan, FAN Hongwei. Summary of research on health status assessment of fully mechanized mining equipment[J]. Journal of Mine Automation, 2023, 49(9): 23-35, 97. DOI: 10.13272/j.issn.1671-251x.18143
    [3]CAI Anjiang, ZHANG Yan, REN Zhigang. Fault knowledge graph construction for coal mine fully mechanized mining equipment[J]. Journal of Mine Automation, 2023, 49(5): 46-51. DOI: 10.13272/j.issn.1671-251x.2023020005
    [4]JI Lei. Study on the weakening of coal wall with section resistance adjustment of fully mechanized support in hard thick coal seam with large mining height[J]. Journal of Mine Automation, 2022, 48(3): 5-10. DOI: 10.13272/j.issn.1671-251x.2022010006
    [5]MENG Guangrui, DING Zhen, LI Haodang. Discussion on key technologies of intelligent and autonomous coal cutting in fully mechanized mining[J]. Journal of Mine Automation, 2021, 47(S2): 1-3.
    [6]LIU Qing, HAN Xiuqi, XU Lanxin, QIN Wenguang. Cooperative control technology of shear and hydraulic support on fully-mechanized coal mining face[J]. Journal of Mine Automation, 2020, 46(5): 43-48. DOI: 10.13272/j.issn.1671-251x.17520
    [7]GAO Weiyong, ZHANG Minjuan. Research on following automation technology of hydraulic support on fully—mechanized coal mining face[J]. Journal of Mine Automation, 2018, 44(11): 14-17. DOI: 10.13272/j.issn.1671—251x.2018050040
    [8]CHEN Lei. Determination of real-time working resistance of support in fully-mechanized working face of medium-thickness coal seam[J]. Journal of Mine Automation, 2016, 42(12): 36-41. DOI: 10.13272/j.issn.1671-251x.2016.12.008
    [9]DU Yan, MENG Guoying, ZHANG Hanwen, ZHANG Miaotian, FENG Yu. Design of embedded monitoring and control platform of conveyor equipment of fully mechanized coal face of coal mine[J]. Journal of Mine Automation, 2014, 40(7): 96-98. DOI: 10.13272/j.issn.1671-251x.2014.07.026
    [10]HU Yua. New Technology of Quick and Safe Support Removal of Fully Mechanized Face[J]. Journal of Mine Automation, 2010, 36(10): 85-88.

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (51) PDF downloads (9) Cited by()
    Related

    苏ICP备 05016349号-2

    Supported by: Beijing Renhe Information Technology Co., Ltd. Visits：1172528    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return