Citation: | LI Shengpu, WANG Xiaohui. Study of mining method of signal of coal and gas outburst[J]. Journal of Mine Automation, 2015, 41(6): 58-60. DOI: 10.13272/j.issn.1671-251x.2015.06.014 |
[1] | CHEN Jiyong, WU Zhaohong, LI Jinxi. Aging indexes analysis of explosion-proof lithium battery based on incremental capacity method[J]. Journal of Mine Automation, 2019, 45(12): 29-34. DOI: 10.13272/j.issn.1671-251x.2019080003 |
[2] | GAO Zheng-zhong, ZENG Qing-liang, DAI Chuan-hua, BAI Xing-zhen. Design of Polarizing Control System of Industrial Circulating Water Based on ARM[J]. Journal of Mine Automation, 2012, 38(6): 25-27. |
[3] | CAO Hong, LI Zhen, JIA Hong-gang. Design of Communication Interface between ARM and DSP Based on Dual-port RAM[J]. Journal of Mine Automation, 2012, 38(3): 72-74. |
[4] | ZHANG Li-yong, JIANG Pei-gang, FANG Su-la. Design of Laser Coal Stocktaking System Based on Embedded ARM and GPRS[J]. Journal of Mine Automation, 2010, 36(12): 72-75. |
[5] | WEI Wei, ZHAO Yong, LI Hong-ren, CONG Da-cheng, HAN Jun-wei. Data Acquisition System for Automatic Gear-box of Vehicle Based on xPCTarget[J]. Journal of Mine Automation, 2010, 36(11): 109-112. |
[6] | LI Zhen, JIA Hong-gang, LI Dong-xiao, CAO Hong. Design of Vibration Monitoring System of Coal Mine Equipments Based on DSP and ARM[J]. Journal of Mine Automation, 2010, 36(10): 1-3. |
[7] | LI Jun, WANG Jin-hai. Remote Update System of ARM Software Based on TFTP[J]. Journal of Mine Automation, 2010, 36(7): 22-25. |
[8] | ZHAO Ping-qiang, XU Ke-fei, WANG Xi-jing, GAO Li-li, LIU Hong-gang. Design of Equalization Charging System for LiFePO4 Power Battery of Mine-used Monorail[J]. Journal of Mine Automation, 2010, 36(6): 70-73. |
[9] | XIE Ai-ling~(, 2), WU Kan~(, 2). Application Research of R2V and Desktop ArcInfo in Land Reclamation Planning of Mining Area[J]. Journal of Mine Automation, 2009, 35(8): 100-103. |
[10] | LIU Peng, XIA Bo-kai, WANG Wei-bo, CUI Hai-peng. Design of Low-power Measuring Apparatus for Electrical Quantity Based on MSP430F449[J]. Journal of Mine Automation, 2008, 34(6): 79-81. |