MENG Qingyong, GU Chuang. Information security risk assessment of industrial Internet of coal mine[J]. Journal of Mine Automation, 2019, 45(8): 43-47. DOI: 10.13272/j.issn.1671-251x.17381
Citation: MENG Qingyong, GU Chuang. Information security risk assessment of industrial Internet of coal mine[J]. Journal of Mine Automation, 2019, 45(8): 43-47. DOI: 10.13272/j.issn.1671-251x.17381

Information security risk assessment of industrial Internet of coal mine

More Information
  • For problems that information security protection measures of industrial Internet of coal mine were mostly applied to small areas and it was difficult to assess the whole information security risk, an information security risk assessment method of industrial Internet of coal mine was proposed which was based on static and dynamic dimensions. In the method, security protection regulations carried out in coal mine information systems are feature-transformed according to Information Security Technology-baseline for Classified Protection of Cybersecurity and GB/T 34679-2017 General Technical Specifications for Smart Mine Information Systems, and a correlation coefficient matrix of security protection requirements for each system is established, so as to calculate the number of security protection regulations which are actually carried out in the system. Then, a security risk assessment model is established by combining with risk number and probability of higher risk category, so as to assess information security risk of industrial Internet of coal mine. The test result shows that the method can effectively assess information security status of industrial Internet of coal mine, and guide coal mine enterprise to analyze information security risk and design and carry out security protection plan, so as to decrease information security risk of industrial Internet of coal mine.
  • Related Articles

    [1]TENG Daiyu, NAN Bingfei. Visual automatic detection method for hydraulic support loss state at the working face[J]. Journal of Mine Automation, 2024, 50(11): 99-108. DOI: 10.13272/j.issn.1671-251x.2024070087
    [2]LI Lei, XU Chunyu, SONG Jiancheng, TIAN Muqin, SONG Danyang, ZHANG Jie, HAO Zhenjie, MA Rui. Attitude monitoring method for hydraulic support in fully mechanized working face based on PSO-ELM[J]. Journal of Mine Automation, 2024, 50(8): 14-19. DOI: 10.13272/j.issn.1671-251x.2024070023
    [3]GAO Siwei, GU Minyong, LI Dianpeng. Design of height measurement sensor for hydraulic support in fully mechanized working face[J]. Journal of Mine Automation, 2024, 50(6): 129-135. DOI: 10.13272/j.issn.1671-251x.2024010089
    [4]GUO Yufeng, PU Shijiang, FU Wei, LIANG Wenxu. Movement law of overburden in upward fully mechanized working face and determination of support working resistance[J]. Journal of Mine Automation, 2021, 47(3): 89-94. DOI: 10.13272/j.issn.1671-251x.2020060048
    [5]WU Shiliang, YANG Lulin. Big data analysis system of working resistance of support[J]. Journal of Mine Automation, 2017, 43(11): 86-89. DOI: 10.13272/j.issn.1671-251x.2017.11.017
    [6]CHEN Lei. Determination of real-time working resistance of support in fully-mechanized working face of medium-thickness coal seam[J]. Journal of Mine Automation, 2016, 42(12): 36-41. DOI: 10.13272/j.issn.1671-251x.2016.12.008
    [7]ZHAO Shimin, LIU Qing. Design of laser alignment sensor for alignment of hydraulic supports on working face[J]. Journal of Mine Automation, 2016, 42(11): 74-77. DOI: 10.13272/j.issn.1671-251x.2016.11.018
    [8]FU Dongbo. Application of SOI pressure sensor to working resistance monitoring of hydraulic support[J]. Journal of Mine Automation, 2015, 41(8): 21-24. DOI: 10.13272/j.issn.1671-251x.2015.08.006
    [9]WANG Yuanjie, TIAN Xiao. Analysis of influence of hydraulic support resistance of large mining height on rib fall of coal wall under the second mining of residual coal[J]. Journal of Mine Automation, 2014, 40(9): 24-27. DOI: 10.13272/j.issn.1671-251x.2014.09.006
    [10]JIANG Chunyue, TIAN Muqin, SONG Jiancheng, XU Chunyu, YANG Shihua, CHAI Wen, YANG Dong, DONG Guangzhuai. Design of hydraulic support controller for automatic working face[J]. Journal of Mine Automation, 2014, 40(9): 1-5. DOI: 10.13272/j.issn.1671-251x.2014.09.001
  • Cited by

    Periodical cited type(5)

    1. 程显,余亚东,葛国伟,张钰峥,万其森. 混合式直流断路器状态感知技术与智慧框架体系探讨. 电网技术. 2024(07): 3033-3042 .
    2. 陆旭锋,王霄峰,左昊忱. 基于电容耦合法的高压断路器真空度在线监测技术研究. 仪表技术. 2024(04): 82-86 .
    3. 杨永旭,许鑫,张慧媛,吴振升. 太赫兹波光谱传输在断路器真空度检测中的应用. 电气应用. 2022(08): 45-51+7-8 .
    4. 李宇,王忠利. 电力断路器的真空度在线检测系统设计. 仪表技术与传感器. 2020(11): 91-94+100 .
    5. 陈江,杨帆,陈洪飞. 新型矿用高压真空配电装置的应用研究. 煤炭与化工. 2018(09): 87-89+93 .

    Other cited types(3)

Catalog

    Article Metrics

    Article views (193) PDF downloads (26) Cited by(8)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return