Research on optimization of coal roadway support parameters and equipment technology in Tianshuibao Coal Mine
-
摘要: 目前巷道快速掘进技术研究主要针对巷道快速掘进的影响因素、设备优化等,对巷道空顶距、支护参数、施工工艺联合优化的研究较少。针对该问题,以甘肃省环县甜水堡煤矿2号井1309工作面回风巷为研究对象,对煤巷支护参数与设备工艺优化方法进行研究。分析了巷道掘进各工序的用时特征,得出掘进、永久支护、临时支护用时最多,占比分别为25.3%,49.9%,6.2%;以耗时最长的3个工序为重点优化方向,构建了掘进工作面空顶区顶板力学模型,得出掘进工作面理论最大空顶距为2.32 m,考虑现场受设备、地质、工艺等因素影响,确定空顶距为2.0 m;根据不同支护方案下巷道围岩应力、变形、塑性区的分布特征,结合巷道高效掘进需求,确定最佳锚杆间排距为800 mm×1 000 mm。结合巷道实际的地质条件,配套优化了掘进设备、临时支护工艺与施工工艺。现场试验结果表明,优化后最大日进尺由8 m提高到10 m,巷道掘进速度提高了25%;巷道围岩变形基本处于稳定状态,最大变形量为226 mm。优化方案不仅保证了巷道的安全稳定,还显著提高了巷道的掘进速度。Abstract: Currently, research on rapid excavation technology mainly focuses on the influencing factors and equipment optimization of rapid excavation. There is relatively little research on the joint optimization of roadway empty roof distance, support parameters, and construction technology. In order to solve the above problem, the study focuses on the return air roadway of the 1309 working face in the No.2 of Tianshuibao Coal Mine in Huanxian County, Gansu Province. The study investigates the optimization methods of coal roadway support parameters and equipment technology. The study analyzes the time features of each process of roadway excavation. It is found that excavation, permanent support, and temporary support take the most time, accounting for 25.3%, 49.9%, and 6.2% respectively. Focusing on the three most time-consuming processes as the optimization direction, a mechanical model of the roof in the goaf area of the excavation face is constructed. The theoretical maximum empty roof distance of the excavation face is obtained to be 2.32 meters. Considering the influence of equipment, geology, technology and other factors on site, the empty roof distance is determined to be 2.0 meters. Based on the distribution features of stress, deformation, and plastic zone in the surrounding rock of the roadway under different support schemes, combined with the efficient excavation requirements of the roadway, the optimal spacing between anchor rods is determined to be 800 mm × 1000 mm. Based on the actual geological conditions of the roadway, the excavation equipment, temporary support technology, and construction technology are optimized and matched. The on-site test results show that after optimization, the maximum daily footage has been increased from 8 meters to 10 meters, and the roadway excavation speed has been increased by 25%. The deformation of the surrounding rock in the roadway is basically in a stable state, with a maximum deformation of 226 mm. The optimization plan not only ensures the safety and stability of the roadway, but also significantly improves the excavation speed of the roadway.
-
表 1 数值计算模型中煤岩体物理力学参数
Table 1. Physical and mechanical parameters of coal rock in numerical calculation model
岩层 厚度/m 密度/(kg·m−3) 体积模量/GPa 剪切模量/GPa 黏聚力/MPa 内摩擦角/(°) 抗拉强度/MPa 泥岩 2.80 2 480 5.46 3.49 3.42 28.4 2.63 中粒砂岩 2.61 2 600 5.68 3.71 3.23 30.2 2.59 砂质泥岩1 4.59 2 500 9.06 8.01 6.15 31 3.35 细粒砂岩1 3.48 2 720 11.21 6.75 15.73 39 3.57 3号煤 2.88 1 350 1.21 0.72 1.16 17 1.46 砂质泥岩2 2.68 2 540 9.45 8.81 6.52 26 3.42 细粒砂岩2 2.69 2 700 15.64 10.28 7.47 34.6 5.46 砂质泥岩3 2.06 2 490 8.47 7.04 5.32 29 3.46 粗粒砂岩 3.60 2 760 22.46 9.13 11.43 32 2.38 表 2 模拟支护方案
Table 2. Different support simulation schemes
方案编号 顶锚杆间排距/(mm×mm) 帮锚杆间排距/(mm×mm) 1 800×800 800×800 2 800×900 800×900 3 800×1 000 800×1 000 4 900×900 900×900 5 900×1 000 900×1 000 6 1 000×1 000 1 000×1 000 -
[1] 康红普,姜鹏飞,刘畅. 煤巷智能快速掘进技术与装备的发展方向[J]. 采矿与岩层控制工程学报,2023,5(2):5-7.KANG Hongpu,JIANG Pengfei,LIU Chang. Development of intelligent rapid excavation technology and equipment for coal mine roadways[J]. Journal of Mining and Strata Control Engineering,2023,5(2):5-7. [2] 康红普,伊康. 深部软岩巷道围岩扩容与流变特性模拟研究及应用[J]. 煤炭学报,2023,48(1):15-33.KANG Hongpu,YI Kang. Simulation study on dilatant and rheologic properties of soft rocks surrounding deep roadway and its application[J]. Journal of China Coal Society,2023,48(1):15-33. [3] 张忠国. 煤巷快速掘进系统的发展趋势与关键技术[J]. 煤炭科学技术,2016,44(1):55-60.ZHANG Zhongguo. Development tendency and key technology of mine seam gateway rapid driving system[J]. Coal Science and Technology,2016,44(1):55-60. [4] 康红普,姜鹏飞,高富强,等. 掘进工作面围岩稳定性分析及快速成巷技术途径[J]. 煤炭学报,2021,46(7):2023-2045.KANG Hongpu,JIANG Pengfei,GAO Fuqiang,et al. Analysis on stability of rock surrounding heading faces and technical approaches for rapid heading[J]. Journal of China Coal Society,2021,46(7):2023-2045. [5] 康红普. 我国煤矿巷道围岩控制技术发展70年及展望[J]. 岩石力学与工程学报,2021,40(1):1-30.KANG Hongpu. Seventy years development and prospects of strata control technologies for coal mine roadways in China[J]. Chinese Journal of Rock Mechanics and Engineering,2021,40(1):1-30. [6] 王虹,王建利,张小峰. 掘锚一体化高效掘进理论与技术[J]. 煤炭学报,2020,45(6):2021-2030.WANG Hong,WANG Jianli,ZHANG Xiaofeng. Theory and technology of efficient roadway advance with driving and bolting integration[J]. Journal of China Coal Society,2020,45(6):2021-2030. [7] 罗文,杨俊彩. 神东矿区快速掘进装备与技术研究现状及展望[J]. 工矿自动化,2021,47(增刊2):32-38.LUO Wen,YANG Juncai. Research status and prospects on rapid tunneling equipment and technology in Shendong mining area[J]. Industry and Mine Automation,2021,47(S2):32-38. [8] 高宇,刘佳. 基于人机关系的煤巷掘进作业优化[J]. 工矿自动化,2023,49(5):147-152.GAO Yu,LIU Jia. Optimization of coal roadway heading operation based on human-machine relationship[J]. Journal of Mine Automation,2023,49(5):147-152. [9] 丁震. 我国煤巷掘进装备现状及发展趋势[J]. 工矿自动化,2014,40(4):23-27.DING Zhen. Status and development trend of tunneling equipments of coal drift in China[J]. Industry and Mine Automation,2014,40(4):23-27. [10] 刘畅,姜鹏飞,王子越,等. 煤巷快速成巷技术现状及应用效果评价方法研究[J]. 煤炭科学技术,2020,48(11):26-33.LIU Chang,JIANG Pengfei,WANG Ziyue,et al. Research on current situation of rapid driving technology in coal roadway and its assessment method of application effect[J]. Coal Science and Technology,2020,48(11):26-33. [11] 张东宝. 煤巷智能快速掘进技术发展现状与关键技术[J]. 煤炭工程,2018,50(5):56-59.ZHANG Dongbao. Development status and key technology of intelligent rapid driving technology in coal seam roadway[J]. Coal Engineering,2018,50(5):56-59. [12] 康红普,王金华,高富强. 掘进工作面围岩应力分布特征及其与支护的关系[J]. 煤炭学报,2009,34(12):1585-1593.KANG Hongpu,WANG Jinhua,GAO Fuqiang. Stress distribution characteristics in rock surrounding heading face and its relationship with supporting[J]. Journal of China Coal Society,2009,34(12):1585-1593. [13] KANG Hongpu,WU Le,GAO Fuqiang,et al. Field study on the load transfer mechanics associated with longwall coal retreat mining[J]. International Journal of Rock Mechanics and Mining Sciences,2019,124. DOI: 10.1016/j.ijrmms.2019.104141. [14] 王国法,任怀伟,赵国瑞,等. 煤矿智能化十大“痛点”解析及对策[J]. 工矿自动化,2021,47(6):1-11.WANG Guofa,REN Huaiwei,ZHAO Guorui,et al. Analysis and counter measures of ten 'pain points' of intelligent coal mine[J]. Industry and Mine Automation,2021,47(6):1-11. [15] 王步康. 煤矿巷道掘进技术与装备的现状及趋势分析[J]. 煤炭科学技术,2020,48(11):1-11.WANG Bukang. Current status and trend analysis of readway driving technology and equipment in coal mine[J]. Coal Science and Technology,2020,48(11):1-11. [16] 程建远,陆自清,蒋必辞,等. 煤矿巷道快速掘进的“长掘长探”技术[J]. 煤炭学报,2022,47(1):404-412.CHENG Jianyuan,LU Ziqing,JIANG Bici,et al. A novel technology of "long excavation/long detection" for rapid excavation in coal mine roadway[J]. Journal of China Coal Society,2022,47(1):404-412. [17] 柏建彪,肖同强,李磊. 巷道掘进空顶距确定的差分方法及其应用[J]. 煤炭学报,2011,36(6):920-924.BAI Jianbiao,XIAO Tongqiang,LI Lei. Unsupported roof distance determination of roadway excavation using difference method and its application[J]. Journal of China Coal Society,2011,36(6):920-924. [18] 马睿. 巷道快速掘进空顶区顶板破坏机理及稳定性控制[D]. 徐州:中国矿业大学,2016.MA Rui. Failure mechanism and stability control of empty roof in roadway rapid excavation[D]. Xuzhou:China University of Mining and Technology,2016. [19] 吴拥政,吴建星,王峰. 巷道掘支锚连续平行作业机理及其应用[J]. 煤炭科学技术,2016,44(6):39-44.WU Yongzheng,WU Jianxing,WANG Feng. Mechanism and application of excavation,support and bolting continuous parallel operation in roadway[J]. Coal Science and Technology,2016,44(6):39-44. [20] 卓军,范凯,刘少伟,等. 弱黏结复合顶板巷道快速掘进支护关键技术与装备[J]. 煤炭技术,2022,41(3):80-82.ZHUO Jun,FAN Kai,LIU Shaowei,et al. Key technology and equipment of fast driving and supporting in weak bond compound roof roadway[J]. Coal Technology,2022,41(3):80-82. [21] 董庆,蔡志炯,赵洪. 掘锚一体机在特厚煤层大断面回采巷道支护中的应用[J]. 煤炭工程,2018,50(12):35-40.DONG Qing,CAI Zhijiong,ZHAO Hong. Application study on support technology for gateway of large section in extremely thick coal seam using intellectualized driving and anchor machine[J]. Coal Engineering,2018,50(12):35-40. [22] 郭俊生,李玉岐,谢苗. 单巷快速掘进技术在斜沟煤矿的应用[J]. 煤矿安全,2021,52(6):123-128.GUO Junsheng,LI Yuqi,XIE Miao. Application of single lane rapid driving technology in Xiegou Coal Mine[J]. Safety in Coal Mines,2021,52(6):123-128. [23] 陈宇,张洋,耿继业,等. 高应力煤巷掘锚护一体化快速掘进工序优化与支护技术[J]. 煤矿安全,2019,50(7):120-123.CHEN Yu,ZHANG Yang,GENG Jiye,et al. Procedure optimization and support technology of tunneling-anchoring-shielding integration speedy drivage for high stress coal roadway[J]. Safety in Coal Mines,2019,50(7):120-123. [24] 陈大广. 掘锚一体化巷道支护参数分析与工序优化[J]. 煤矿安全,2017,48(10):224-227,231.CHEN Daguang. Roadway supporting parameters analysis and process optimization for excavation and bolting integration[J]. Safety in Coal Mines,2017,48(10):224-227,231. [25] 孙立虎,王敏,于冰冰,等. 大倾角倒梯形煤巷新型配套快速掘进技术研究[J]. 煤炭工程,2023,55(11):49-55.SUN Lihu,WANG Min,YU Bingbing,et al. A new rapid excavation technology of large dip angle inverted trapezoidal coal roadway[J]. Coal Engineering,2023,55(11):49-55. -