矿井提升机自适应无线通信系统设计

阎东慧

阎东慧.矿井提升机自适应无线通信系统设计[J].工矿自动化,2020,46(5):99-103.. DOI: 10.13272/j.issn.1671-251x.2020010004
引用本文: 阎东慧.矿井提升机自适应无线通信系统设计[J].工矿自动化,2020,46(5):99-103.. DOI: 10.13272/j.issn.1671-251x.2020010004
YAN Donghui. Design of an adaptive wireless communication system for mine hoist[J]. Journal of Mine Automation, 2020, 46(5): 99-103. DOI: 10.13272/j.issn.1671-251x.2020010004
Citation: YAN Donghui. Design of an adaptive wireless communication system for mine hoist[J]. Journal of Mine Automation, 2020, 46(5): 99-103. DOI: 10.13272/j.issn.1671-251x.2020010004

矿井提升机自适应无线通信系统设计

基金项目: 

大同煤矿集团科技研究与开发项目(2016JD0015)

详细信息
  • 中图分类号: TD633/655

Design of an adaptive wireless communication system for mine hoist

  • 摘要: 目前,矿井提升机有线通信系统布线繁琐、检修复杂,而无线通信系统因发射功率、频率和天线辐射方向固定,存在无线通信距离有限、信号无法根据井筒形状和长度灵活覆盖、通信信号不稳定等弊端。针对上述问题,设计了一种矿井提升机自适应无线通信系统。该系统所有设备的数据均通过以太网接口输入,无线通信部分采用接收信号强度自动感知、工作频率和辐射波束自动调整的自适应天线,可以将无线摄像仪、无线电话等矿用设备进行无线互连,实现提升机、罐耳、油缸、钢丝绳及天轮等主要设施的视频监视、数据监测及语音通信。当提升机运行时,系统根据立井井筒的结构、深度与尺寸,自动调整位于井筒顶部的天线的工作参数,使得天线能够始终对准移动中的提升机,通信设备的工作频率和功率始终处于最佳状态,保证了无线信号的良好覆盖。现场应用结果表明,提升机运行时地面调度人员能够实时监视天轮、井筒、罐耳及提升机内部状况,可随时与提升机内人员通话,图像清晰,语音通信流畅,且设备功耗低。
    Abstract: At present, mine hoist's wired communication system is complicated in wiring and maintenance, however, due to fixed transmission power, frequency and radiation direction of antenna, the mine hoist's wireless communication system has disadvantages of limited wireless communication distance, the signal cannot be flexibly covered according to shape and length of shaft, and communication signal is unstable. In view of the above problems, an adaptive wireless communication system for mine hoist was designed.The data of all equipments in the system is input through Ethernet interface, and wireless communication part adopts the adaptive antenna with automatic sensing of received signal strength, automatic adjustment of working frequency and radiation beam, which can wirelessly interconnect wireless camera,wireless telephone and other mine-used equipments, so as to realize video monitoring, data monitoring and voice communication of main equipments such as hoist, cage ear, oil cylinder, steel wire rope and hoisting sheave. When the hoist is in operating, the system can automatically adjust working parameters of the antenna located at the top of the shaft according to structure, depth and size of vertical shaft, so that the antenna can always be aligned with the moving hoist, communications equipment operating frequency and power is always in the best state, ensuring good coverage of wireless signals.The field application verifies when the hoist is in operating, the ground dispatching personnel can real-timely monitor internal conditions of the hoisting sheave, shaft, cage ears and hoist, and can realize telephone and broadcasting with the relevant personnel in the cage at any time, the image is clear, the voice communication is smooth, and the equipment power consumption is low.
  • 期刊类型引用(7)

    1. 王方田,李哲,张村,何东升,张洋. 高瓦斯煤层大直径钻孔卸压增透瓦斯渗流时空演化机理. 煤炭科学技术. 2024(S1): 47-61 . 百度学术
    2. 赵永刚. 大孔径高位钻孔瓦斯抽采技术在王庄煤矿的应用. 陕西煤炭. 2023(01): 164-168 . 百度学术
    3. 李泉新,姚克,方俊,姚亚峰,史春宝. 煤矿井下瓦斯高效精准抽采定向钻进技术与装备. 煤炭科学技术. 2023(S1): 65-72 . 百度学术
    4. 高奎英,陈建华,王蒙,马宝,李志斌. 水平定向钻在构建井/巷间输送通道中的应用研究. 煤炭技术. 2023(12): 67-70 . 百度学术
    5. 王向东. 超大孔径钻孔在综采工作面上隅角瓦斯治理中应用分析. 煤. 2021(01): 92-94 . 百度学术
    6. 王传留. 岩层联络孔冲剪复合碎岩原理可行性研究. 煤田地质与勘探. 2021(03): 244-248 . 百度学术
    7. 高晓亮,居培,赵建国. 煤层顶板大直径定向钻孔用双级双速PDC钻头设计及应用. 煤田地质与勘探. 2021(05): 272-277+285 . 百度学术

    其他类型引用(2)

计量
  • 文章访问数:  97
  • HTML全文浏览量:  13
  • PDF下载量:  15
  • 被引次数: 9
出版历程
  • 刊出日期:  2020-05-19

目录

    /

    返回文章
    返回