自动化记忆放煤控制研究

崔志芳, 牛剑峰

崔志芳,牛剑峰.自动化记忆放煤控制研究[J].工矿自动化,2019,45(3):99-102.. DOI: 10.13272/j.issn.1671-251x.2018060030
引用本文: 崔志芳,牛剑峰.自动化记忆放煤控制研究[J].工矿自动化,2019,45(3):99-102.. DOI: 10.13272/j.issn.1671-251x.2018060030
CUI Zhifang, NIU Jianfeng. Research on automatic memory coal caving control[J]. Journal of Mine Automation, 2019, 45(3): 99-102. DOI: 10.13272/j.issn.1671-251x.2018060030
Citation: CUI Zhifang, NIU Jianfeng. Research on automatic memory coal caving control[J]. Journal of Mine Automation, 2019, 45(3): 99-102. DOI: 10.13272/j.issn.1671-251x.2018060030

自动化记忆放煤控制研究

基金项目: 

国家重点研发计划资助项目(2018YFC0604500)

能源自主创新资助项目(发改投资〔2015〕1780号)

详细信息
  • 中图分类号: TD355

Research on automatic memory coal caving control

  • 摘要: 针对综采放顶煤工作面人工放煤控制方式存在放煤效率低、质量差等问题,参考采煤机记忆割煤控制思想,提出了自动化记忆放煤控制方法。自动化记忆放煤控制通过示范学习获取记忆放煤控制数据,由液压支架电液控制系统根据记忆放煤控制数据控制液压支架放煤机构位姿,通过调整放煤口开度实现放煤量控制;同时通过液压支架放煤机构位姿与放煤量关系模型计算复核放煤量,进而修正记忆放煤控制数据,防止出现后部刮板输送机过载等情况。该方法适用于煤层较稳定、煤层厚度变化不大的放顶煤工作面。
    Abstract: For low coal caving efficiency, poor coal caving quality and other problems existing in manual coal caving control mode of fully-mechanized top coal caving working face, an automatic memory coal caving control method was proposed by referring to memory coal cutting control idea of shearer. Automatic memory coal caving control obtains memory coal caving control data through exemplary learning. Electro-hydraulic control system of hydraulic support controls position and attitude of coal caving mechanisms of hydraulic support according to the memory coal caving control data, so as to realize coal caving quantity control through adjusting coal caving opening degree. Meanwhile, the coal caving quantity is calculated by a relationship model between position and attitude of the coal caving mechanisms and coal caving quantity, so as to correct the memory coal caving control data for avoiding overload of rear scraper conveyer. The method is applicable to top coal caving working faces which have stable coal seam with little thickness change.
  • 期刊类型引用(6)

    1. 陈书航,王世博,葛世荣,王赟,马广军. 综采工作面刮板输送机煤流时空分布研究. 工矿自动化. 2024(09): 98-107 . 本站查看
    2. 王桂忠,叶隆浩. 基于煤流量识别的带式输送机节能控制系统设计与研究. 煤矿机械. 2023(01): 14-17 . 百度学术
    3. 周爱民,叶飞,施旭东,赵培成. 基于超声波传感器的带式输送机烟丝瞬时流量监测系统的设计. 现代信息科技. 2022(03): 149-152 . 百度学术
    4. 唐文杰. 带式输送机运行状态智能监控体系的研究. 机械管理开发. 2022(09): 300-301+304 . 百度学术
    5. 毛清华,毛金根,马宏伟,张旭辉,李铮. 矿用带式输送机智能监测系统研究. 工矿自动化. 2020(06): 48-52+58 . 本站查看
    6. 李瑶,王义涵. 带式输送机煤流量自适应检测方法. 工矿自动化. 2020(06): 98-102 . 本站查看

    其他类型引用(4)

计量
  • 文章访问数:  100
  • HTML全文浏览量:  16
  • PDF下载量:  11
  • 被引次数: 10
出版历程
  • 刊出日期:  2019-03-19

目录

    /

    返回文章
    返回