Analysis of influence regularity of cutting head load to roadheader's deviation angle
-
摘要: 为研究悬臂式掘进机截割过程中截割头载荷对机身偏向角的影响规律，建立了掘进机机身偏向角动力学模型，根据模型求解的输入问题，提出了一种截割头载荷计算方法，并通过仿真计算得到截割头载荷与驱动油缸压力及悬臂截割位置之间的关系。对掘进机截割过程中机身偏向角的变化进行了仿真分析，得到了不同工况下和不同悬臂截割位置时截割头载荷对掘进机机身偏向角的影响规律：横向截割工况下，机身偏向角随截割头载荷的增大而增大，且在悬臂水平摆角为14°时达到最大值；纵向截割工况下，机身偏向角随截割头载荷的增大而减小，且悬臂垂直摆角越大，机身偏向角越小。Abstract: In order to obtain influence regularity of cutting head load to deviation angle of boom-type roadheader during cutting process, a dynamical model of roadheader's deviation angle was established. According to input problem solved by the model, a calculation method of the cutting head load was proposed, and relationship between the cutting head load and pressure of driving cylinders and cutting position of cutting arm was obtained by simulating calculation. The variation of roadheader's deviation angle during cutting process was simulated and analyzed, and influence regularity of the cutting head load to the deviation angle in different cutting conditions and different cutting positions of the cutting arm were obtained: In horizontal cutting condition, the deviation angle increases with increasing of the cutting head load , and it reaches to the maximum when the horizontal angle of the cutting arm is 14°; in vertical cutting condition, the deviation angle decreases with increasing of the cutting head load, and the larger vertical angle of the cutting arm is, the smaller the deviation angle is.
-
Keywords:
- coal mining /
- boom-type roadheader /
- deviation angle /
- cutting head load /
- horizontal cutting /
- vertical cutting /
- dynamical model
-
-
期刊类型引用(8)
1. 王宇凛. 不同参数对掘进机载荷功率谱的影响分析. 机械管理开发. 2024(02): 42-43 . 
百度学术
2. 赵福喜. 掘进机截齿截割作业时的受力特性研究. 机械管理开发. 2023(11): 17-19 . 百度学术
3. 宗凯，李旭，王鹏江，王旭. 悬臂式掘进机截割臂摆角跳动消除的控制方法. 黑龙江科技大学学报. 2021(01): 48-52 . 百度学术
4. 刘振广，徐正华，廖茂新，刘宏亮. 尾矿坝振动实验数据样本容量的优化研究. 南华大学学报(自然科学版). 2021(06): 35-39 . 百度学术
5. 冯君玲，田慕琴，贺颖，王茜. 纵轴式掘进机截割头载荷影响因素的仿真分析. 工矿自动化. 2020(05): 21-27 . 本站查看
6. 冯君玲，田慕琴，贺颖，王茜. 纵轴式掘进机截割臂升降运动的仿真分析. 液压与气动. 2020(09): 22-28 . 百度学术
7. 宗凯，符世琛. 大倾角巷道掘进机截割过程整机滑移的力学模型. 黑龙江科技大学学报. 2020(04): 404-410 . 百度学术
8. 宗凯，符世琛，王鹏江. 倾斜煤层掘进机整机姿态的动力学模型与响应. 黑龙江科技大学学报. 2020(05): 505-510 . 百度学术
其他类型引用(9)
计量
- 文章访问数: 58
- HTML全文浏览量: 5
- PDF下载量: 14
- 被引次数: 17
下载:
