基于速度控制的多级带式输送机顺序启动方法

Method of sequence start of multi-level belt conveyors based on speed control

  • 摘要: 为了提高带式输送机的节能效率,提出了一种沿物料运送分向顺序启动的多级带式输送机控制方法。在胶带上物料横截面积最大的前提下,该方法首先建立带速与负载的匹配模型,然后通过设计科学合理的加速曲线,实现带式输送机软启动后的速度与匹配带速之间的变频调节,最后计算各级带式输送机顺序启动的控制时间。仿真分析结果表明,该方法的节能效率为12%。

     

    Abstract: In order to increase energy-saving efficiency of belt conveyors, a control method of sequence start along the direction of material transport for multi-level belt conveyors was proposed. On the premise of maximum utilization of material cross section on the belt, firstly, matching model between belt speed and load was built. Then, frequency adjustment between belt speed after the soft start and the matching belt speed was implemented by designing scientific and available acceleration curve. Finally, the sequence start control time of multi-level belt conveyors was calculated. The simulation results show that the method increases energy-saving efficiency to 12%.

     

/

返回文章
返回