矿用可穿戴翻折结构半模衬底集成空腔天线设计

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

矿用可穿戴翻折结构半模衬底集成空腔天线设计

崔洁, 刘逢雪, 臧其亮, 徐钊

文章导航 > 工矿自动化 > 2016 > 42(6): 8-12

崔洁，刘逢雪，臧其亮，等.矿用可穿戴翻折结构半模衬底集成空腔天线设计［J］.工矿自动化，2016, 42(6)：8-12.. doi: 10.13272/j.issn.1671-251x.2016.06.003

引用本文:

崔洁，刘逢雪，臧其亮，等.矿用可穿戴翻折结构半模衬底集成空腔天线设计［J］.工矿自动化，2016, 42(6)：8-12.. doi: 10.13272/j.issn.1671-251x.2016.06.003

CUI Jie, LIU Fengxue, ZANG Qiliang, et al. Design of mine-used wearable folded half-mode substrate-integrated cavity antenna[J]. Industry and Mine Automation, 2016, 42(6): 8-12. doi: 10.13272/j.issn.1671-251x.2016.06.003

Citation:

CUI Jie, LIU Fengxue, ZANG Qiliang, et al. Design of mine-used wearable folded half-mode substrate-integrated cavity antenna[J]. Industry and Mine Automation, 2016, 42(6): 8-12. doi: 10.13272/j.issn.1671-251x.2016.06.003

崔洁，刘逢雪，臧其亮，等.矿用可穿戴翻折结构半模衬底集成空腔天线设计［J］.工矿自动化，2016, 42(6)：8-12.. doi: 10.13272/j.issn.1671-251x.2016.06.003

引用本文:

崔洁，刘逢雪，臧其亮，等.矿用可穿戴翻折结构半模衬底集成空腔天线设计［J］.工矿自动化，2016, 42(6)：8-12.. doi: 10.13272/j.issn.1671-251x.2016.06.003

CUI Jie, LIU Fengxue, ZANG Qiliang, et al. Design of mine-used wearable folded half-mode substrate-integrated cavity antenna[J]. Industry and Mine Automation, 2016, 42(6): 8-12. doi: 10.13272/j.issn.1671-251x.2016.06.003

Citation:

CUI Jie, LIU Fengxue, ZANG Qiliang, et al. Design of mine-used wearable folded half-mode substrate-integrated cavity antenna[J]. Industry and Mine Automation, 2016, 42(6): 8-12. doi: 10.13272/j.issn.1671-251x.2016.06.003

矿用可穿戴翻折结构半模衬底集成空腔天线设计

doi: 10.13272/j.issn.1671-251x.2016.06.003

1.
江苏建筑职业技术学院能源与交通工程学院，江苏徐州221116
2.
中国矿业大学信息与电气工程学院，江苏徐州221008

基金项目:

国家安全监管总局资助项目（jiangsu-0002-2015AQ）

中图分类号: TD655.3
计量
- 文章访问数: 67
- HTML全文浏览量: 9
- PDF下载量: 6
- 被引次数: 0
出版历程
- 刊出日期: 2016-06-10

Design of mine-used wearable folded half-mode substrate-integrated cavity antenna

1.
College of Energy and Transportation Engineering, Jiangsu Vocational Institute of Architectural Technology, Xuzhou 221116, China
2.
School of Information and Electrical Engineering, China University

摘要: 根据煤矿井下对可穿戴天线的要求，在半模衬底集成空腔天线的基础上，采用折叠结构降低天线主体的宽度，并利用水平放置的馈电探针实现可穿戴天线扁平化，设计了一种矿用可穿戴翻折结构半模衬底集成空腔天线。仿真结果表明，该天线在5 GHz处于谐振状态，-10 dB带宽约为254 MHz，最大增益为5.4 dBi，辐射效率为70%，辐射方向具有较宽的主瓣和较低的背向辐射，且可通过增加上层衬底厚度来增加天线-10 dB带宽。
- 矿用天线 /
- 可穿戴天线 /
- 半模衬底集成空腔天线 /
- 翻折结构
Abstract: Based on half-mode substrate-integrated cavity antenna, a mine-used wearable folded half-mode substrate-integrated cavity antenna was designed considering requirements for underground wearable antenna. Width of antenna is reduced by use of folded geometry, and planar antenna is realized with horizontal feeding probe structure. The simulation results show that the antenna resonates at 5 GHz, -10 dB bandwidth is 254 MHz, the maximum gain is 5.4 dBi, radiation efficiency is 70%, and the antenna has radiation direction with wide beamwidth and low back radiation. Besides, -10 dB bandwidth of the antenna can be increased with thicker upper substrate.
- mine-used antenna /
- wearable antenna /
- half-mode substrate-integrated cavity antenna /
- folded geometry

参考文献(0)

资源附件(0)

WeChat

点击查看大图

计量

文章访问数: 67
HTML全文浏览量: 9
PDF下载量: 6
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回

苏ICP备 05016349号-2

本系统由北京仁和汇智信息技术有限公司开发访问量：