Volume 48 Issue 5
May  2022
Turn off MathJax
Article Contents
ZHANG Xuhui, WANG Heng, SHEN Qifeng, et al. Improvement of position and posture measurement system for boom-type roadheader based on machine vision[J]. Journal of Mine Automation,2022,48(5):58-64.  doi: 10.13272/j.issn.1671-251x.2021100051
Citation: ZHANG Xuhui, WANG Heng, SHEN Qifeng, et al. Improvement of position and posture measurement system for boom-type roadheader based on machine vision[J]. Journal of Mine Automation,2022,48(5):58-64.  doi: 10.13272/j.issn.1671-251x.2021100051

Improvement of position and posture measurement system for boom-type roadheader based on machine vision

doi: 10.13272/j.issn.1671-251x.2021100051
  • Received Date: 2021-10-30
  • Rev Recd Date: 2022-05-08
  • Available Online: 2022-05-19
  • In coal mine, the dust concentration is high and the illumination is low. The image acquisition quality and characteristic extraction effect are greatly affected by dust concentration. However, the camera parameters and image processing parameters cannot be adjusted adaptively according to the change of dust concentration. Therefore, it is easy to cause problems such as unstable point-line characteristic extraction and image frame loss. In order to solve the above problems, the position and posture measurement system for boom-type roadheader based on machine vision is improved. The mine-used explosion-proof industrial camera is used to collect the laser point-line images under different dust concentrations. The relationship model between the image gray value and the dust concentration level is established through the transmittance. The optimal camera parameters and image processing parameters under different dust concentration levels are obtained through experiments. A parameter adaptive adjustment algorithm is proposed, and the parameter values are adjusted adaptively according to the dust concentration levels. Therefore, the image collection quality and the stability and precision of the point-line characteristic extraction are improved. Moreover, the precision of position and posture measurement system for roadheader based on machine vision is improved. The experimental result show that the average measurement errors in X, Y and Z directions of the improved vision detection system for boom-type roadheader are 28.26 mm, 30.58 mm and 22.54 mm respectively. The number of usable images is increased from 75 to 90 after processing 100 images. These results show that the parameter adaptive adjustment algorithm can effectively improve the precision of image characteristic extraction and the data availability. The algorithm ensures the precision and stability of position and posture measurement system for boom-type roadheader based on machine vision.

     

  • loading
  • [1]
    王国法,刘峰,孟祥军,等. 煤矿智能化(初级阶段)研究与实践[J]. 煤炭科学技术,2019,47(8):1-36.

    WANG Guofa,LIU Feng,MENG Xiangjun,et al. Research and practice on intelligent coal mine construction (primary stage)[J]. Coal Science and Technology,2019,47(8):1-36.
    [2]
    葛世荣. 煤矿机器人现状及发展方向[J]. 中国煤炭,2019,45(7):18-27. doi: 10.3969/j.issn.1006-530X.2019.07.004

    GE Shirong. Present situation and development direction of coal mine robots[J]. China Coal,2019,45(7):18-27. doi: 10.3969/j.issn.1006-530X.2019.07.004
    [3]
    王国法,王虹,任怀伟,等. 智慧煤矿2025情景目标和发展路径[J]. 煤炭学报,2018,43(2):295-305.

    WANG Guofa,WANG Hong,REN Huaiwei,et al. 2025 scenarios and development path of intelligent coal mine[J]. Journal of China Coal Society,2018,43(2):295-305.
    [4]
    杨健健,张强,王超,等. 煤矿掘进机的机器人化研究现状与发展[J]. 煤炭学报,2020,45(8):2995-3005.

    YANG Jianjian,ZHANG Qiang,WANG Chao,et al. Status and development of robotization research on roadheader for coal mines[J]. Journal of China Coal Society,2020,45(8):2995-3005.
    [5]
    张超,张旭辉,杜昱阳,等. 基于双目视觉的悬臂式掘进机位姿测量技术研究[J]. 煤炭科学技术,2021,49(11):225-235.

    ZHANG Chao,ZHANG Xuhui,DU Yuyang,et al. Pose measurement technology of cantilever roadheader based on binocular vision[J]. Coal Science and Technology,2021,49(11):225-235.
    [6]
    薛光辉,张云飞,候称心,等. 基于激光靶向扫描的掘进机位姿测量方法[J]. 煤炭科学技术,2020,48(11):19-25.

    XUE Guanghui,ZHANG Yunfei,HOU Chenxin,et al. Measurement of roadheader position and posture based on orientation laser scanning[J]. Coal Science and Technology,2020,48(11):19-25.
    [7]
    贾文浩,陶云飞,张敏骏,等. 基于iGPS的煤巷狭长空间中掘进机绝对定位精度研究[J]. 仪器仪表学报,2016,37(8):1920-1926. doi: 10.3969/j.issn.0254-3087.2016.08.025

    JIA Wenhao,TAO Yunfei,ZHANG Minjun,et al. Research on absolute positioning accuracy of roadheader based on indoor global positioning system in narrow and long coal tunnel[J]. Chinese Journal of Scientific Instrument,2016,37(8):1920-1926. doi: 10.3969/j.issn.0254-3087.2016.08.025
    [8]
    刘超,符世琛,成龙,等. 基于TSOA定位原理混合算法的掘进机位姿检测方法[J]. 煤炭学报,2019,44(4):1255-1264.

    LIU Chao,FU Shichen,CHENG Long,et al. Pose detection method based on hybrid algorithm of TSOA positioning principle for roadheader[J]. Journal of China Coal Society,2019,44(4):1255-1264.
    [9]
    毛清华,张旭辉,马宏伟,等. 多传感器信息的悬臂式掘进机空间位姿监测系统研究[J]. 煤炭科学技术,2018,46(12):41-47.

    MAO Qinghua,ZHANG Xuhui,MA Hongwei,et al. Study on spatial position and posture monitoring system of boom-type roadheader based on multi sensor information[J]. Coal Science and Technology,2018,46(12):41-47.
    [10]
    杜雨馨,刘停,童敏明,等. 基于机器视觉的悬臂式掘进机机身位姿检测系统[J]. 煤炭学报,2016,41(11):2897-2906.

    DU Yuxin,LIU Ting,TONG Minming,et al. Pose measurement system of boom-type roadheader based on machine vision[J]. Journal of China Coal Society,2016,41(11):2897-2906.
    [11]
    马宏伟,王世斌,毛清华,等. 煤矿巷道智能掘进关键共性技术[J]. 煤炭学报,2021,46(1):310-320.

    MA Hongwei,WANG Shibin,MAO Qinghua,et al. Key common technology of intelligent heading in coal mine roadway[J]. Journal of China Coal Society,2021,46(1):310-320.
    [12]
    杨文娟,张旭辉,马宏伟,等. 悬臂式掘进机机身及截割头位姿视觉测量系统研究[J]. 煤炭科学技术,2019,47(6):50-57.

    YANG Wenjuan,ZHANG Xuhui,MA Hongwei,et al. Research on position and posture measurement system of body and cutting head for boom-type roadheader based on machine vision[J]. Coal Science and Technology,2019,47(6):50-57.
    [13]
    张旭辉,赵建勋,杨文娟,等. 悬臂式掘进机视觉导航与定向掘进控制技术[J]. 煤炭学报,2021,46(7):2186-2196.

    ZHANG Xuhui,ZHAO Jianxun,YANG Wenjuan,et al. Vision-based navigation and directional heading control technologies of boom-type roadheader[J]. Journal of China Coal Society,2021,46(7):2186-2196.
    [14]
    刘伟华. 基于机器视觉的煤尘在线检测系统关键技术研究[D]. 济南: 山东大学, 2011.

    LIU Weihua. Research on key technologies in on-line system for coal dust partical detection based on machine vision[D]. Jinan: Shandong University, 2011.
    [15]
    纪大波,方晓,曹廷校,等. 基于图像处理测量露天爆破粉尘量[J]. 工程爆破,2017,23(4):34-38. doi: 10.3969/j.issn.1006-7051.2017.04.007

    JI Dabo,FANG Xiao,CAO Tingxiao,et al. Measuring dust amount of open-pit blasting based on image processing[J]. Engineering Blasting,2017,23(4):34-38. doi: 10.3969/j.issn.1006-7051.2017.04.007
    [16]
    闵武国. CCD成像电子学系统自动曝光和自动增益研究[D]. 大连: 大连海事大学, 2010.

    MIN Wuguo. The study of auto-exposure and auto-gain on CCD imaging electronics system[D]. Dalian: Dalian Maritime University, 2010.
    [17]
    刘志博,朱志鹏,何超,等. 微纳级示踪粒子图像灰度与粒径量化关系研究[J]. 光学学报,2020,40(8):80-86.

    LIU Zhibo,ZHU Zhipeng,HE Chao,et al. Research on quantitative relationship between image gray value and particle diameter of micro-nano-scale tracer particle[J]. Acta Optica Sinica,2020,40(8):80-86.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(5)  / Tables(5)

    Article Metrics

    Article views (1058) PDF downloads(31) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return