Volume 48 Issue 1
Jan.  2022
Turn off MathJax
Article Contents
Article Navigation >  Journal of Mine Automation  > 2022  >  48(1): 40-44
WANG Xinyue, QIAO Tiezhu, PANG Yusong, et al. Coal flow detection method for conveyor belt based on TOF depth image restoration[J]. Industry and Mine Automation，2022，48(1)：39-43.  doi: 10.13272/j.issn.1671-251x.2021080018
Citation: WANG Xinyue, QIAO Tiezhu, PANG Yusong, et al. Coal flow detection method for conveyor belt based on TOF depth image restoration[J]. Industry and Mine Automation，2022，48(1)：39-43.  doi: 10.13272/j.issn.1671-251x.2021080018
shu

Coal flow detection method for conveyor belt based on TOF depth image restoration

doi: 10.13272/j.issn.1671-251x.2021080018
  • 1.

    Key Laboratory of Advanced Transducers and Intelligent Control System, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China

  • 2.

    College of Physics and Optoelectronics, Taiyuan University of Technology, Taiyuan 030024, China

  • 3.

    Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology, 2628 CD Delft, Netherlands

  • 4.

    College of Electrical and Power Engineering, Taiyuan University of Technology, Taiyuan 030024, China

  • Received Date: 2021-08-07
  • Accepted Date: 2021-08-15
  • Rev Recd Date: 2022-01-07
  • Publish Date: 2022-01-20
    Abstract
  • In the traditional belt conveyor coal flow detection device, the nuclear belt scale has certain safety and environmental protection hidden dangers, and the detection precision of electronic belt scale is easily affected by the factors such as belt tension and stiffness. Moreover, non-contact detection methods based on technologies such as ultrasound, linear laser stripes and binocular vision have problems such as poor real-time performance and large measurement errors. A coal flow detection method for conveyor belt based on time-of-flight(TOF) depth image restoration is proposed. The TOF camera is used to obtain the coal conveying image of the conveyor belt. The TOF image is equalized, and the frame difference method and the boundary following algorithm are used to remove the background noise and obtain the coal region of interest. In order to solve the problem of inaccurate edge information caused by flying pixel noise and multi-path error noise at the edge of TOF depth image, the intensity image-guided depth image restoration algorithm is proposed. The Canny edge detection algorithm is used to find similar edges between the depth image and the intensity image. Based on the effective edge information of the intensity image, the unreliable data of the edge of the depth image is corrected. Furthermore, the high-precision depth images are obtained based on Navier-Stokes equation and median filter. The coal area is divided at the pixel level, the coal volume calculation model is established to obtain coal flow of conveyor belt by combining the conveyor belt speed. The experimental results show that the detection error is less than 3.78%, the standard deviation is less than 0.491 and the average processing time is 83 ms, which meets the actual production requirements.

     

    • FullText(HTML)
  • loading
    • References(16)
  • [1]
    孙春升, 宋晓波, 弓海军. 煤矿智慧矿山建设策略研究[J]. 煤炭工程,2021,53(2):191-196.

    SUN Chunsheng, SONG Xiaobo, GONG Haijun. Construction strategy of intelligent coal mine[J]. Coal Engineering,2021,53(2):191-196.
    [2]
    HE Daijie, PANG Yusong, LODEWIJKS G. Green operations of belt conveyors by means of speed control[J]. Applied Energy,2017,188:330-341. doi: 10.1016/j.apenergy.2016.12.017
    [3]
    任凤国, 刘学红, 任安祥, 等. 提高矿用X射线核子秤计量稳定性的研究[J]. 工矿自动化,2018,44(8):24-27.

    REN Fengguo, LIU Xuehong, REN Anxiang, et al. Research on improving measurement stability of mine-used X-ray nuclear scale[J]. Industry and Mine Automation,2018,44(8):24-27.
    [4]
    GAN Hong, CHEN Kun, ZHONG Xinghong. Static analysis on the measurement system of an electronic belt scale[J]. Applied Mechanics and Materials,2013,345:525-529. doi: 10.4028/www.scientific.net/AMM.345.525
    [5]
    MIHUT N M. Designing a system for measuring the flow of material transported on belts using ultrasonic sensors[J]. IOP Conference Series:Materials Science and Engineering,2015,95:012089. doi: 10.1088/1757-899X/95/1/012089
    [6]
    李萍, 任安祥. 基于机器视觉的带送煤炭体积测量方法研究[J]. 工矿自动化,2018,44(4):24-29.

    LI Ping, REN Anxiang. Research on volume measurement method of coal on belt conveying based on machine vision[J]. Industry and Mine Automation,2018,44(4):24-29.
    [7]
    代伟, 赵杰, 杨春雨, 等. 基于双目视觉深度感知的带式输送机煤量检测方法[J]. 煤炭学报,2017,42(增刊2):547-555.

    DAI Wei, ZHAO Jie, YANG Chunyu, et al. Detection method of coal quantity in belt conveyor based on binocular vision depth perception[J]. Journal of China Coal Society,2017,42(S2):547-555.
    [8]
    LANGE R, SEITZ P. Solid-state time-of-flight range camera[J]. IEEE Journal of Quantum Electronics,2001,37(3):390-397. doi: 10.1109/3.910448
    [9]
    HORAUD R, HANSARD M, EVANGELIDIS G. An overview of depth cameras and range scanners based on time-of-flight technologies[J]. Machine Vision and Applications,2016,27(7):1005-1020. doi: 10.1007/s00138-016-0784-4
    [10]
    HANSARD M, LEE S, CHOI O, et al. Time-of-flight cameras: principles, methods and applications[M]. Berlin: Springer, 2013.
    [11]
    孙哲, 张勇, 常衢通. 基于置信度的TOF与双目系统深度数据融合[J]. 北京航空航天大学学报,2018,44(8):1764-1771.

    SUN Zhe, ZHANG Yong, CHANG Qutong. In-depth data fusion of TOF and stereo vision system based on confidence level[J]. Journal of Beijing University of Aeronautics and Astronautics,2018,44(8):1764-1771.
    [12]
    REMONDINO F, STOPPA D. 飞行时间测距成像相机[M]. 北京: 国防工业出版社, 2013.

    REMONDINO F, STOPPA D. Time-of-flight ranging imaging camera[M]. Beijing: National Defense Industry Press, 2013.
    [13]
    JIMéNEZ D, PIZARRO D, MAZO M, et al. Modeling and correction of multipath interference in time of flight cameras[J]. Image and Vision Computing,2014,32(1):1-13. doi: 10.1016/j.imavis.2013.10.008
    [14]
    KNOLL F, BREDIES K, POCK T, et al. Second order total generalized variation(TGV) for MRI[J]. Magnetic Resonance in Medicine,2011,65(2):480-491. doi: 10.1002/mrm.22595
    [15]
    刘娇丽, 李素梅, 李永达, 等. 基于TOF与立体匹配相融合的高分辨率深度获取[J]. 信息技术,2016(12):190-193.

    LIU Jiaoli, LI Sumei, LI Yongda, et al. High-resolution depth maps based on TOF-stereo fusion[J]. Information Technology,2016(12):190-193.
    [16]
    JUNG J, LEE J, JEONG Y, et al. Time-of-flight sensor calibration for a color and depth camera pair[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence,2015,37(7):1501-1513. doi: 10.1109/TPAMI.2014.2363827
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(8)  / Tables(2)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (310) PDF downloads(34) Cited by()
    Proportional views
    Related

    苏ICP备 05016349号-2

    Supported by: Beijing Renhe Information Technology Co. Ltd.  Visits：    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return