Optimization design of complex flameproof enclosure based on finite element analysis

SUN Yu; LIU Li

doi:10.13272/j.issn.1671-251x.2015.04.014

Volume 41 Issue 4

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2015 > 41(4): 52-54

SUN Yu, LIU Li. Optimization design of complex flameproof enclosure based on finite element analysis[J]. Industry and Mine Automation, 2015, 41(4): 52-54. doi: 10.13272/j.issn.1671-251x.2015.04.014

Citation:

SUN Yu, LIU Li. Optimization design of complex flameproof enclosure based on finite element analysis[J]. Industry and Mine Automation, 2015, 41(4): 52-54. doi: 10.13272/j.issn.1671-251x.2015.04.014

SUN Yu, LIU Li. Optimization design of complex flameproof enclosure based on finite element analysis[J]. Industry and Mine Automation, 2015, 41(4): 52-54. doi: 10.13272/j.issn.1671-251x.2015.04.014

Citation:

SUN Yu, LIU Li. Optimization design of complex flameproof enclosure based on finite element analysis[J]. Industry and Mine Automation, 2015, 41(4): 52-54. doi: 10.13272/j.issn.1671-251x.2015.04.014

PDF( 867 KB)

Optimization design of complex flameproof enclosure based on finite element analysis

doi: 10.13272/j.issn.1671-251x.2015.04.014

SUN Yu,
LIU Li

CCTEG Chongqing Research Institute, Chongqing 400039, China

Publish Date: 2015-04-10

Abstract

Abstract

According to requirements of GB/T 3836.2-2010 for flameproof enclosure, three-dimensional design software was used for modeling of complex flameproof enclosure. Box model was simplified according to manufacturing process of the box, and influence of simplified method on the results was validated. Finite element analysis software was used for analysis of the model, and the maximum deformation data of the box was obtained to enhance strength of the box.
- complex flameproof enclosure,
- finite element analysis,
- model simplification,
- structure optimizatio