Design of image acquisition system of underground belt connector

HUANG Hesong; GAO Xiang; YUE Weichao; LIAO Yubo; LI Ping

doi:10.13272/j.issn.1671-251x.2014.11.003

Volume 40 Issue 11

Turn off MathJax

Article Contents

Article Navigation > Journal of Mine Automation > 2014 > 40(11): 10-13

HUANG Hesong, GAO Xiang, YUE Weichao, et al. Design of image acquisition system of underground belt connector[J]. Industry and Mine Automation, 2014, 40(11): 10-13. doi: 10.13272/j.issn.1671-251x.2014.11.003

Citation:

HUANG Hesong, GAO Xiang, YUE Weichao, et al. Design of image acquisition system of underground belt connector[J]. Industry and Mine Automation, 2014, 40(11): 10-13. doi: 10.13272/j.issn.1671-251x.2014.11.003

Citation:

PDF( 803 KB)

Design of image acquisition system of underground belt connector

doi: 10.13272/j.issn.1671-251x.2014.11.003

HUANG Hesong^{1, 2},
GAO Xiang^{1, 2},
YUE Weichao^{1, 2},
LIAO Yubo³,
LI Ping³

1.
College of Electrical and Automation Engineering, Shandong University of Science and Technology, Qingdao 266590, China
2.
Shandong Robotics & Intelligent Technology Key Laboratory, Qingdao 266590, C

Publish Date: 2014-11-10

Abstract

Abstract

In view of problems of leak-detection and misinformation existed in present detection methods of belt connector state, an image acquisition system of underground belt connector was designed. The system adopts inductance-type proximity switch to detect belt metal connector real-timely and also controls digital camera to capture the images of the positions of travelling belt automatically. Then, it uses underground looped network to transfer the images to the ground monitoring room , so as to achieve real-time capturing and processing of the belt connector images and eliminate hidden danger of tearing, tripping of the belt connector in time.
- belt connector,
- image acquisition,
- image transmission,
- speed sensor,
- proximity switch