2009 Vol. 35, No. 6

  Previous Issue | Next Issue 
Display Method:
Cover Catalogue
Numerical Simulation Research of Pressure Relief Mechanism of Borehole of Small Pillar Stress Concentrated Areas
LI Jin-kui, LIU Dong-sheng, LI Xue-bin, XIONG Zhen-hua
2009, 35(6): 1-4.
<Abstract>(70) <PDF>(5)
Abstract:
The paper analyzed the pressure relief mechanism of borehole of small pillar stress concentrated areas,used ADINA finite element software to simulate the function mechanism of pressure relief of borehole,the development of dynamic damage and destruction of surrounding rock-mass,the redistribution of stress field around borehole.Through comparing numerical simulations in different apertures and pitchrows of borehole of small pillar stress concentrated areas,it was found that the pressure relief borehole with rational aperture and pitchrow could induce structural failure of the coal seam,consequently the high stress area of pillar moved deeply in the coal seam.The simulation result showed that pressure relief of borehole of small pillar stress concentrated areas has prominent effect for controlling deformation and destruction of the small pillar.
Design of Industry-used Redundancy Power Supply Based on LTC4357
FU Wei, LIU Cheng-tao, WANG Ping
2009, 35(6): 4-7.
<Abstract>(20) <PDF>(6)
Abstract:
Single fault problem of power supply equipments often induces damage of equipments in industrial field,so as to cause loss for production.Aiming at the problem,the paper proposed a solution of industry-used redundancy power supply based on LTC4357.It expounded the principle of N+1 redundancy mode,introduced design of the redundancy module in the redundancy power supply in details,and indicated the problems and solutions when the DC regulated power supply module was used in industrial filed.At last,it gave real graph of the redundancy power supply.The actual application showed that the scheme has certain feasibility.
Research of Monitoring and Control System of Wireless Temperature Sensor Ad-hoc Networks for Coal Spontaneous Combustion Based on CC1020
DENG Jun~(, WANG Wei-feng~(, 3)
2009, 35(6): 12-14.
<Abstract>(33) <PDF>(6)
Abstract:
Aiming at the problem of spontaneous fire of mist coal in gob area,the paper proposed(a design) scheme of monitoring and control system of wireless temperature sensor ad-hoc networks for coal spontaneous combustion based on CC1020.It gave overall framework of the system,introduced design of hardware and software of node of the wireless temperature sensor ad-hoc networks in details.The experiment result showed that the system has characteristics of far communication distance and strong penetrability and diffractiveness,which is more applicable to complex and multivariant circumstance such as existence of underground bar,narrow laneway space and curving laneway.
Brief Analysis of Application of Cognitive Radio in Mine Communicatio
CHEN Gui-zhen, DING En-jie, ZHANG Shen, HU Qing-song
2009, 35(6): 12-14.
<Abstract>(22) <PDF>(5)
Abstract:
On the basis of analyzing the advantages and disadvantages of present wireless communication system of coal mine,the paper briefly introduced the basic knowledge of cognitive radio and its core contents,namely structure composition and functions of cognitive engine and cognitive loop.Then it indicated the advantages and feasibility of the cognitive radio technology used in wireless communication of coal mine underground.
Research of Model Selection of Dragline Equipment of Opencast Mine
MEI Xiao-ren~(, 2)
2009, 35(6): 15-18.
<Abstract>(23) <PDF>(10)
Abstract:
The existing geological conditions of our opencast mines are suitable to adopt overcastting mining technique of dragline.The paper researched model selection of dragline equipment of opencast mine,analyzed determination principle of main mining parameters of model selection of dragline equipment in opencast mine,introduced basic steps of model selection as well as calculation method of main parameters of dragline equipment.At last,it used computer simulation technology to build mathematical model of model selection of dragline equipment.
Research of DBA Algorithm of EPON System of Mining Area
ZHONG Li-yun~, JIA Sheng~
2009, 35(6): 18-21.
<Abstract>(35) <PDF>(4)
Abstract:
The paper proposed a kind of improved dynamic bandwidth allocation(DBA) algorithm which was applicable to EPON system of mining area based on analyzing the particularity of EPON system of mining area and the shortcomings of traditional DBA algorithm.It analyzed implementation process of the algorithm in details.The experiment result showed that the algorithm realizes the function of DBA based on service-oriented as well as compromises the fairness of allocation,and guarantees the time delay requests of different priority businesses.
Measurement of Influence of Mining Car on Transmission Characteristics of Electromagnetic Wave
LIANG Hong~, PAN Tao~
2009, 35(6): 21-23.
<Abstract>(33) <PDF>(6)
Abstract:
The existence of mining car changes figure and size of cross section of coal mine laneway,so it influences transmission characteristics of electromagnetic wave.The paper measured the influence of mining car on transmission characteristics of electromagnetic wave in coal mine laneway on the site and analyzed measured data in details.The measuring result showed that transmission attenuation of electromagnetic wave has relation with the length of carriage and the transmission frequency,the existence of mining car makes increase of transmission attenuation of electromagnetic wave.In range of 50～(900 MHz,) the higher the frequency of electromagnetic wave is and the smaller the attenuation is,the more propitious they are to transmit electromagnetic wave.
Frequency-domain Super-resolution TOA Position Algorithm of Underground
CHEN Kui, XU Zhao
2009, 35(6): 24-28.
<Abstract>(31) <PDF>(4)
Abstract:
On the basis of analyzing three kinds of wireless position methods,the paper indicated the TOA position method could provide higher position precision,which had certain feasibility used in underground.And aiming at the problems that TOA position method had limited time resolution and could not meet with the demands used in underground,it proposed a frequency-domain super-resolution TOA position algorithm based on subspace decomposition and MUSIC algorithm.At last it used the algorithm to simulate the two typical conditions of OLOS and LOS between sending antenna and receiving antenna.The result showed that the frequency-domain super-resolution TOA position algorithm can improve time resolution and achieve higher position precision under the condition of low SNR,which is suitable for underground personnel position.
Application and Cumulative Configuration of Weighing Instrument in Dry Coaldust Conveying
CHEN Gui-hua, YU De-ling, LU Wen-xue, JIANG Jia-ji
2009, 35(6): 29-31.
<Abstract>(52) <PDF>(6)
Abstract:
Application of Improved Wavelet Packet Algorithm in Fault Diagnosis of Frequency-conversion Speed-regulation System
ZHU Gao-zhong~, FENG Gao-ming~
2009, 35(6): 31-35.
<Abstract>(31) <PDF>(2)
Abstract:
On the basis of research of current fault diagnosis method of AC-AC frequency-conversion speed-regulation system,the paper proposed a fault diagnosis method of AC-AC frequency-conversion speed-regulation system with improved wavelet packet algorithm.It expounded principle of improved wavelet packet algorithm on the basis of analyzing principle and disadvantages of standard wavelet packet algorithm and introduced the method using the improved wavelet packet algorithm to pick up characteristic quantity of fault signal of frequency converter in details.The simulation result showed that amount of calculation and appropriative storage space of the improved wavelet packet algorithm are less than that of the standard wavelet packet algorithm.Compared with current fault diagnosis method,the fault diagnosis method of frequency-conversion speed-regulation system based on the improved wavelet packet algorithm has advantages of high accuracy,fast diagnosis speed,etc.
Research of Scheme of Dynamic Reactive Power Compensation of Mine Hoist
WANG Yu-mei~, AI Yong-le~, WANG Na~
2009, 35(6): 36-38.
<Abstract>(19) <PDF>(3)
Abstract:
Aiming at the problems of impact of reactive power and high-order harmonic wave pollution caused by mine hoist to power grid,the paper proposed a scheme of TSC type dynamic reactive power compensation of mine hoist taking characteristics of hoist load of one coal mine of Jiaozuo coal mine group as sample.It analyzed influence of mine hoist load on power grid and harmonic current produced by mine hoist load,and introduced design and implementation of the scheme in details.The simulation result showed that the scheme of TSC type dynamic reactive power compensation can satisfy the requests of dynamic compensation basically,and can enhance power factor of net side and reduce input of harmonic wave to high-voltage power grid as well as reduce distortion rate of harmonic voltage and harmonic current.
Design of Vector Control System of Asynchronous Motor Based on DSP and Its Simulatio
OU Wei-bin, LI Jun-sheng
2009, 35(6): 39-42.
<Abstract>(36) <PDF>(4)
Abstract:
The paper proposed a design scheme of vector control system of asynchronous motor which took DSP chip as controller,analyzed control principle of the vector control system,introduced hardware design and software program of the system in details as well as gave simulation experiment of the system.The experiment result showed that the vector control system of asynchronous motor based on DSP has good start characteristics,high control precision,quick dynamic response,which is suitable for situation with higher demand on system performance.
Using Majority Function to Realize Sensorless Brushless DC Motor Control with Back-electromotive Force Filtering
HU Bang-nan, LIU Yuan-yua
2009, 35(6): 42-45.
<Abstract>(111) <PDF>(5)
Abstract:
The paper proposed a method of using majority function to realize sensorless brushless DC motor control with back-electromotive force filtering.The method uses DSPIC A/D converter to sample BEMF signal of trapezoidal wave,then it compares the BEMF signal of trapezoidal wave with reconstructed virtual neutral-point of the motor so as to detect crossover point,and uses majority function filter to make filtering procession for the comparative result.When detecting crossover point,the DSPIC30F2010 ADC changes phase for the driving voltage of the motor after one delay time.At last,the method uses control loop to realize(highly efficient) and smooth running of the sensorless brushless DC(motor.) Compared with the mode of using hardware filter or external comparator,the method has the advantages of few hardware,little cost and small PCB size.The actual application showed that the method is simple and practical,which has good performances.
Sensitive Overload Protection of Motor Based on Thermal Model
LU Qing-gang, LE Xiao-rong
2009, 35(6): 46-49.
<Abstract>(28) <PDF>(3)
Abstract:
Implementation of Porting μC/OS-Ⅱ Operating System to ARM7
XU Jie~, SONG Jian-cheng~, YAN Xian-yong~
2009, 35(6): 49-52.
<Abstract>(31) <PDF>(2)
Abstract:
In order to solve the problem of bad compatibility between monitoring and control network of coal mine and the third party equipments,the paper proposed a design scheme of embedded multi-bus communication protocol converter.It expounded contents of software part of the scheme emphatically,namely implementation of porting μC/OS-Ⅱ real-time operating system to AT91M40800,and pointed out the problems that should be paid attention to in the porting process as well as solution methods.At last it programmed testing codes.The software had been ported in the circuit board developed by our research group,the running application showed that the system is steady and reliable under multi-task environment.
Setting Method of Baud Rate of CAN Bus and Its Error Analysis
YU Yue-sen, QIAN Zhen-hua, PENG Li-ming, LIU Jia
2009, 35(6): 52-55.
<Abstract>(48) <PDF>(2)
Abstract:
CAN bus is a kind of network with asynchronous and serial communication which can effectively support distributed control and real-time control and multi-master.Taking integrated CAN controller in C8051F060 single-chip microcomputer as example,the paper introduced the setting method of baud rate in details.It analyzed error sources of baud rate setting and gave several ways for eliminating the error of baud rate.
Research of a Data Storage Engine with High Performance Oriented Flash Memory
ZHOU Xiao-yun~(, 2), QIN Xiong-pai~
2009, 35(6): 56-61.
<Abstract>(32) <PDF>(2)
Abstract:
Traditional data storage engine updates data by in place update technique which would induce performance reduction and wear aggravation of Flash Memory.Aiming at the problem,the paper proposed a multi version data storage engine MV4Flash oriented Flash Memory which used out place update technique.The data storage engine uses the mechanism of multi version storage and garbage collection and updates and modifies all data by file superaddition mode,which is suitable for the characteristic of erase before write of Flash Memory and can prolong its life.The result of performance test for the data storage engine with NDB Bench showed that compared with traditional InnoDB,the MV4Flash has higher performance of transaction processing,so the MV4Flash is more suitable for application system with large data volume and high real-time demand.
Present Situation and Developing Trend of New Type of Measuring Technology for Liquid-level
YANG Chao-hong~, LI Huan~
2009, 35(6): 61-64.
<Abstract>(16) <PDF>(4)
Abstract:
The paper introduced some new kinds of measuring instruments for liquid-level used in industry production process and their measuring methods,such as fiber liquid-level meter,magnetostriction liquid-level meter,fork liquid-level limit switch,differential pressure type liquid-level meter,radar liquid-level meter and servo type float liquid-level meter,and analyzed and compared the characteristics of the several liquid-level meters.At last,it indicated that automatic measuring technology for liquid-level on the one hand must use new measuring principle,develop new measuring instruments for liquid-level and expand measuring way,on the other hand,it must develop facing on micro-computerization and intelligence.
Design of Hydraulic Support Control System Based on Double CAN Buses
LIU Guo-ping, QIU Ji-yuan, LI Jian-wu
2009, 35(6): 65-68.
<Abstract>(46) <PDF>(4)
Abstract:
Aiming at the problems of bad environment in fully mechanized mining working face in mine and a large number of nodes of hydraulic support,the paper proposed a design scheme of hydraulic support control system based on double CAN buses.It analyzed working environment of the system,gave structure of the system and introduced design of hardware and software of controller nodes in details as well as expounded implementation of double CAN buses communication.The system classifies data on bus into adjacent support operation data and support state data according to working requests of the system,and transfers these data through two different channels,which can realize automatic switch function of the channels when one bus has fault.The practical application showed that real-time performance of the system is better than of single CAN bus when two CAN buses and all nodes are in normal working condition.Specially,under interruption condition of one CAN bus,the communication system based on single CAN bus will not work,but the communication system based on double CAN buses will work normally and real-time and reliability performance of the system will not decline.The scheme provides a new design idea for application of double CAN buses and enhancing performance of communication network of hydraulic support control system.
Design of USB Host System Based on ISP1161
ZHANG Liang, Xu Qi Xueguang, LIU Ding-li, DONG Hong-yi
2009, 35(6): 68-70.
<Abstract>(40) <PDF>(12)
Abstract:
Research of Long Array Infrared Scanning Position System in Open Space
LI Li-xin, LI Jian-fa
2009, 35(6): 71-74.
<Abstract>(52) <PDF>(2)
Abstract:
The paper introduced composition and working principle of the long array infrared scanning position system in open space,expounded design of electronic displacement scanning circuit with line by line and interference processing of strong sunlight infrared and implementation of fault detection of infrard module, as well as gave software design of the system.The system uses the technology of electronic displacement high-speed scanning with line by line,the technology of automatic detection of system fault and many kinds of anti-interference measures of outdoor strong sunlight infrared to identify fault position and fault type of the infrared module of the system,which realizes quick and accurate position and improves ability of anti-interference of the system and stability,reliability and maintenance of the position.The system uses Delphi to develop the main control software of the system in order to finish the functions of display,output,setting of working parameters and state detection of the position result.The system has been applied in actual projects,which has good effect.
Design of Distributed Wireless Information Collection System of Mine and Its Implementatio
LI Shu-qi, XU Yu-ming, SONG Yi-qing, WANG Hai-bi
2009, 35(6): 74-77.
<Abstract>(34) <PDF>(3)
Abstract:
Design of Personnel Position System Based on Industrial Ring-Ethernet
WEI Wen-si
2009, 35(6): 78-80.
<Abstract>(23) <PDF>(4)
Abstract:
Design of Integrated Automation System of Pump Room Based on Industrial Ethernet
HU Xiao-qin, ZHANG Xiao-guang, YIN Chun-rong, ZHANG Tao, MA Yu
2009, 35(6): 81-83.
<Abstract>(26) <PDF>(5)
Abstract:
Design of Detection Management Information System of Mine-used Equipment and Its Implementatio
REN Chuan-cheng
2009, 35(6): 84-87.
<Abstract>(19) <PDF>(3)
Abstract:
Aiming at the actual demands of mine-used equipment detection and inspection center,the paper gave the business process of detection management information system of mine-used equipment,and introduced function model of the system as well as expounded architecture of the system and structure design of the database form.At last,it discussed some key techniques in the process of implementation of the system.
Application of On-line Monitoring System of Main Ventilator of Coal Mine
ZHANG Ji-yua
2009, 35(6): 87-90.
<Abstract>(41) <PDF>(3)
Abstract:
Application Technology of Database in Configuration Software
ZHANG Lu, TAN Guo-jun, ZHANG Xiao, ZHANG Zhen-fei
2009, 35(6): 91-94.
<Abstract>(45) <PDF>(4)
Abstract:
Design of Remote Monitoring and Control System for Coal Mine Safety Based on DSP
DONG Yun-hua, ZHENG Xian-feng
2009, 35(6): 94-96.
<Abstract>(38) <PDF>(5)
Abstract:
The paper introduced design of a remote monitoring and control system for coal mine safety based on DSP,gave structure model of the system,emphatically analyzed realization methods of data collection and devices control and data communication as well as software design of the system.The system has functions of real-time display and early warning and forecast for accidents.Besides,it can realize remote monitoring and control and resource sharing through GPRS and Internet.
Application of Double-feed Frequency-conversion Speed-regulation System with Full Control in Mine Hoist
WANG Jian-liang
2009, 35(6): 97-99.
<Abstract>(30) <PDF>(4)
Abstract:
Application of Speed-regulation System of Switched Reluctance Driver in Coal Mine
LIU Wen-nuan, SONG Peng
2009, 35(6): 100-101.
<Abstract>(17) <PDF>(3)
Abstract:
Brief Discussion of Application of Model KJ95N Coal Mine Safety Monitoring and Control System
ZHANG Jing-kun, ZHANG Fang-ya
2009, 35(6): 102-104.
<Abstract>(52) <PDF>(3)
Abstract:
Design of Network Monitoring and Control System of Underground Low-voltage Electrical Equipments Based on uClinux
SUN Quan-cai, YANG A
2009, 35(6): 105-107.
<Abstract>(38) <PDF>(3)
Abstract:
Development of Intelligent Type Electronic Over-load Protection Relay of Motor Based on LPC2292
ZHOU You-li
2009, 35(6): 107-111.
<Abstract>(39) <PDF>(3)
Abstract:
The paper proposed a design scheme of an intelligent type electronic over-load protection relay of motor based on μC/OS-II embedded operating system and LPC2292 embedded microprocessor.On the basis of adopting symmetrical component method to analyze common faults of three-phase asynchronous motor,the paper introduced hardware design of the relay and introduced priority distribution of all kinds of tasks of μC/OS-II embedded operating system and design thought of the data communication part based on CAN bus in details.The relay can select the best matching mode to control and protect motor automatically according to running state of load as well as intercommunicate with upper computer.The experiment running and field application results showed that the relay has easy operation,reliable performance,perfect protection functions and strong anti-interference ability.
Design of Sensor System Based on USB Interface
TIAN Bing, ZHAO Zong-qu, LI Chang-chu
2009, 35(6): 111-112.
<Abstract>(38) <PDF>(3)
Abstract:
Design of Embedded PLC Based on RPN Algorithm
SUN Wei-bing, REN Zi-hui, WEI Tong-yu, DU Yun-zhe
2009, 35(6): 113-116.
<Abstract>(37) <PDF>(4)
Abstract:
Design of Embedded VoIP Terminal Based on Intel IXP425
GAO Yong-qing, SHANG Dan
2009, 35(6): 116-119.
<Abstract>(15) <PDF>(2)
Abstract:
Using embedded chip to develop VoIP device not only can reduce production cost of VoIP application device and its maintenance cost effectively,but also can promote application of VoIP,which makes it access network more flexibly and conveniently.The paper introduced the basic principle of VoIP,expounded hardware composition and software design of the VoIP terminal taking Intel IXP425 as core,gave the work how to transplant embedded Linux system to the VoIP terminal,finally it tested the performance of the embedded VoIP terminal based on Intel IXP425.The test result showed that the terminal can provide perfect function,friendly and direct operation interface,better voice quality and lower power consumption,and has high feasibility and expansibility.
Application of Nucleon Weighing Technology in Sadashige Loading Control System of Main Shaft
LIN Xin, MENG Fan-xi
2009, 35(6): 120-122.
<Abstract>(69) <PDF>(4)
Abstract:
Design of MES of Process Industry Based on Real-time Database Technology
PAN Cao, WANG Hong-yuan, SHI Jing, SHI Lian-mi
2009, 35(6): 122-125.
<Abstract>(27) <PDF>(6)
Abstract:
Design of Intelligent and Remote Meter Reading System Based on GPRS and Low-voltage Power Line Carrier Communicatio
FU Yang, JIANG Mei-ling
2009, 35(6): 125-128.
<Abstract>(24) <PDF>(3)
Abstract:
The paper proposed a design scheme of intelligent and remote meter reading system based on GPRS and low-voltage power line carrier communication,gave general structure of the system and expounded implementation of the GPRS communication and PLC communication.It introduced design of the concentrator and the collector of the remote terminal in details and gave meter reading steps of the master.The intelligent and remote meter reading system uses lower-voltage power line as transmission channel of the concentrator and the collector,and uploads the energy data stored by the concentrator to the master by GPRS wireless data communication technology,which realizes the function of remote and automatic meter reading of the electric quantity.The actual application showed that the system can reduce working strength greatly and improve automatic degree of energy management.
Automatic Control System of Submersible Pumb of Coal Mine Underground
HOU Cheng-chen, LIU Cun-li
2009, 35(6): 129-130.
<Abstract>(20) <PDF>(4)
Abstract:
Application of Mine Wide Integrated Automation System in Yuwu Mining Corporatio
LU Jian-jun~, HE Yao-yin~
2009, 35(6): 130-133.
<Abstract>(24) <PDF>(3)
Abstract:
Aiming at the problems of big difference among technologies used in each automation system of Yuwu mining corporation and difficult to make efficient and organic integration for each automation system,the paper proposed a reform scheme of mine wide integrated automation system.It introduced structure,working principle,main functions and key technologies of the system.The system makes upgrading reform for each automation system of the corporation on the basis of reserving original investment and builds the software platform of mine wide integrated automation,which realizes organic integration of the automation system of different technical background,deep processing and utilization for various information and grading remote control function,and resolves real-time problem of the system effectively,problem of protecting original investment,problem of rational resource allocation,problem of inclusiveness and expansibility of the system.

苏ICP备 05016349号-2

Supported by: Beijing Renhe Information Technology Co. Ltd.  Visits：