2007 Vol. 33, No. 2

Display Method:
Research of Storage and Query System in the Control and Monitoring System of Industry and Mining Enterprises
YUAN Xiao-ping, ZHU Xiao-wen, HE Yu-wei, YU Hong-zhe
2007, 33(2): 1-3.
Abstract:
According to the practical requirement of control and monitoring system of production process of industry and mining enterprises,a model of data storage and query system was set up,and the implementing process of data query was expounded importantly.The result of the study indicated that the database configuration model and the data query arithmetic can meet the requirement of present data management in the control and monitoring system of industry and mining enterprises.Meanwhile,it also can be used to forecast the accident and analyse the accident reasons.
Research of the General Design Idea of Distributed Monitoring and Diagnosis System
LI Dong-xiao
2007, 33(2): 4-7.
Abstract:
The paper studied the basic theoretic frame of DMDS(distributed monitoring and diagnosis system),put forward the definition,hiberarchy of DMDS and its function definition of each level,and analyzed the relation of DMDS and production control system.
Research of the Application of Chirp-UWB Wireless Communication Technology in Coal Mine Underground
ZHANG Wen-jie, WANG Yan-fe
2007, 33(2): 7-10.
Abstract:
Research of Online Monitoring System of Insulation for Power Cable Based on DSP
TANG Zhong, SHAO Wu-zhou, ZOU Yun-ping, MA Shi-ying, CAI Zhi-hui
2007, 33(2): 10-12.
Abstract:
Research of Speed-regulation Performance of Vector Control System for Asynchronous Motor
MA Jie, LI Ming, HAN Xiao-dong
2007, 33(2): 13-16.
Abstract:
The paper introduced a vector control system taking algorithm of SVPWM as the core by research on the voltage-decoupling vector control system, described the theory of voltage-decoupling vector control and simulation block-diagram of whole control system,and modeled the vector control system with Matlab/ Simulink software.After modeling the whole control system,several experiments for control system, speed-regulation of system and load torque suddenly applying and removing were implemented,and the experiment waveform were analyzed.The simulation results showed that the system not only has good capability of speed-regulation,but also good dynamic and static performance.
Research of Energy Feedback Control Technology in Frequency-conversion Speed-regulatio
ZHANG Zhong-xia
2007, 33(2): 17-20.
Abstract:
Using Information Fusion Technology to Realize Fault-line Selection for Mine Power Network
WANG Qing-liang
2007, 33(2): 20-23.
Abstract:
A new method of fault-line selection for mine power network based on information fusion technology was presented.The method was immune from the condition whether arc-suppression coil existed or nor.It improved the accuracy of lineselection by selecting the stable,singular and transient characteristics of fault as fault feature vectors,employing the D-S evidence theory to transform three fault vectors to criterions,using the iterative algorithm to fusion the criterions which made line-selection result focusing on a common ground of the criterions.The method has good versatility and is especially suite for mine power network.The simulation verified the effectiveness of the proposed method.
Research of a Kind of Digital Gas Detector with Light Interference
WANG Bao-de
2007, 33(2): 24-26.
Abstract:
A kind of gas detector with light interference based on single-chip microcomputer was designed, which took AT89C2051 as center of control and processing.By use of arithmetics such as digital filtering,numerical value lookup,linearization processing etc.,and based on the principle of light inter-ference and optoelectronic switching,the detector realized accurate detection for gas concentration of coal mine,digital display and overrun warning.It has characteristics of simple use,high reliability.
Research of Measurement Apparatus of Capacitance Current Based on Signal-injection Method
DING Ran, WANG Chong-lin, ZHU Jin-long
2007, 33(2): 26-29.
Abstract:
Accompany with adoption of cable in medium voltage distribution network,the level of capa-citance current of the system increases.More and more researchers focus on how to measure the capacitance current to the ground of the distribution network system precisely and swiftly.The paper designed a measurement apparatus of capacitance current based on signal-injection method,which made use of direct digi-tal frequency synthetics(DDFS) technology to produce various frequency signal of current and made use of Fourier to measure the capacitance current of neutral non-valid grounded system.It has advantages of high precision,convenient and flexible for use.
Design of a New Kind of Intelligent Electric Operator with High Current Capacity
LI Yun-bo, BU Xu-hui, PENG Hong-ling
2007, 33(2): 30-33.
Abstract:
Aiming at the shortcomings of traditional electric operator,the paper put forward the design scheme of a new kind of electric operator by using computer technology and electronic technology,and introduced lectotype and design of each functor as well as the solution of the key questions in details.The experiment showed that this operator has characteristics such as quick-moving,high reliability,good protecting function,being convenient for network with computer.
Application of Fuzzy Controller in the Automatic Adjustment for Fume Exhaust Throttle
HUANG Wen-fang, SUN Wei, YAN Gui
2007, 33(2): 33-35.
Abstract:
Application of Self-adaptive Filter Based on DSP in Mine Communicatio
ZHANG Xiao-guang, XU Zhao, WANG Gang, LIU Wei-dong
2007, 33(2): 36-38.
Abstract:
Aiming at the serious problem of environment noise of coal mine underground,the paper applicated the self-adaptive filter in coal mine underground communication to identify system and remove noise.The practice proved that the filter could realize system identifying and noise removing and achieve the effect of improving quality and increasing distance of underground communication.
The Principle of Automatic Meter Reading System of Coal Mine Underground by Use of Power Line Carrier and Its Applicatio
LIU Run-hua, WANG Chun-sheng, HOU Ju-lin, GAO Bao-wei
2007, 33(2): 39-40.
Abstract:
Development of Communication Interface of High-voltage Frequency-converter Based on ST16C552
ZHANG Kun-ao~, GONG Shang-fu~, LIU Min-ceng~
2007, 33(2): 41-43.
Abstract:
The paper briefly introduced the factor should be considered when selecting communication protocol,expounded the data frames of free protocol and its control process of data transmission.It also introduced in details the hardware circuit of ST16C552 applied in communication interface of high-voltage frequency-converter and the development flow of its application software.
Application of Script System Based on XML in DSP System
QIAN Wei, LIU Jua
2007, 33(2): 44-46.
Abstract:
Using GPRS to Realize Real-time Remote Monitoring and Control for Production of Coal Mine
ZHANG Jia, FU Hui-sheng
2007, 33(2): 46-48.
Abstract:
The paper introduced the principle of embedded Internet based on GPRS,described its application in wireless communication and real-time monitoring and control system for production of coal mine.It also indicated the prospect and important significance of using wireless communication based on GPRS and real-time monitoring system.
Design of Acousto-optic Annunciator of Mining Cage
ZHU Jin-long, ZUO Guan-fang, KUANG Wei
2007, 33(2): 49-51.
Abstract:
Application of Model KBJ-60Ⅲ-1 Digital Manometer in Monitoring for Mine's Pressure of Individual Working Face
DU Feng, YANG Ben-shui
2007, 33(2): 51-52.
Abstract:
Development of Mine-used I.S. SDSL Modem and Its Applicatio
JIN Yong-fei, DENG Jun, WEN Hu, WANG Jian-ping
2007, 33(2): 53-54.
Abstract:
Design of Weight Measurement System for Materials on Belt Conveyor
ZHANG Shi-ping
2007, 33(2): 55-57.
Abstract:
Design of Miner's Lamp Management System Based on B/S Model and Its Applicatio
TANG Chao-li, LING Liu-yi, HUANG You-rui
2007, 33(2): 58-60.
Abstract:
Design and Analysis of Real-time Detecting Circuit of Current of Power Network
LU En-gui
2007, 33(2): 60-63.
Abstract:
Remote Monitoring and Control System for Mine Gas Based on LabVIEW
HU Jia-kun, LU Qi-rong
2007, 33(2): 64-66.
Abstract:
Design of Embedded System BootLoader Based on S3C44B0X and Its Implementatio
JIANG Min, CHEN Yi-ming
2007, 33(2): 66-68.
Abstract:
Design of Mine-used I.S. Computer and Its Implementatio
YUAN Feng, LI Wen-feng, LI
2007, 33(2): 69-71.
Abstract:
At present,the computer are extensively used in production of coal mine,the flameproof or flameproof and I.S.computer do not suit the development of mining industry.The paper discussed the design principles of compatibility,expandability,dustproof,shockproof,dampproof and low power consumption of mine-used I.S.computer,and analyzed the technical problems of realizing the mine-used I.S.computer,including the problems of power consumption such as display device,HD and CPU.At last,it provided the implementing method of mine-used I.S.computer.
Design of Portable Detector of Carbon Monoxide Based on MSP430
MAO Hui-qiong~, REN Zi-hui~, NIU Guang-dong~, WEI Min~, CHEN Shi-hai~
2007, 33(2): 72-74.
Abstract:
A design method of portable detector of carbon monoxide was introduced in the paper.The principle of gas detection by infrared technology and method of design and implementing of hardware and software of the system were expounded.The detector made full use of the hardware resource of MSP430 and had some advantages such as low power consumption,quick and precise measurement.
Design of Communication Control System for Fully Mechanized Mining Working Face Based on AT89C52
CHEN Guo-qiang
2007, 33(2): 74-76.
Abstract:
Research of Automatic Control System for Pumps of Underground Central Pump Room and its Applicatio
CHEN Zi-chun, LIU Xiang-xi
2007, 33(2): 77-79.
Abstract:
Design of Online Measure System for Arrester Based on GPRS
WANG Sheng-yi, ZENG Guo-bing, ZENG Yong-hua, ZONG Guo-hua
2007, 33(2): 79-81.
Abstract:
Research of Speed Control of Stepper Motor and Its Implementatio
XU Yu-ming
2007, 33(2): 82-85.
Abstract:
Design of Monitoring Software of Air Classification System and Its Implementatio
CHENG Xiao-feng, HE Jing-min, LI Hai-sheng
2007, 33(2): 85-87.
Abstract:
Application of the System of Speed-regulation and Driven by Frequency-converter in Coal Mine Belt Conveyor System
ZHANG Geng-ye
2007, 33(2): 87-90.
Abstract:
Development of Intelligent Monitoring and Control System of Temperature Measurement Based on 1-wire Bus
XUE Hong-mei, JIA Shao-rui, YANG Li
2007, 33(2): 90-92.
Abstract:
Improvement of the Method of Dust-eliminating by Spraying at Transfer Point of Belt Conveyor of Coal Mine
ZHANG Shu-wang
2007, 33(2): 93-94.
Abstract:
Design of PCI Interface Card of LonWorks Control Networks
PU Xin-zheng, LI Li
2007, 33(2): 94-96.
Abstract:
Design of Intelligent Pressure Meter with Digital Display of Three-way Valve Test-bed and Its Applicatio
ZHAO Sheng-min, XU Le-nian, ZHAO Sheng-li
2007, 33(2): 96-98.
Abstract:
Application of Distributed Temperature Sensing System of Optical Fiber in Temperature Measurement of Freezing Overburden Section of Coal Mine
XU Jian, MA Bi
2007, 33(2): 99-101.
Abstract:
Design of Data Collecting System of Coal Mine Based on CAN Bus
CHENG Li-ping, WANG Jin-ye, LIU Rui-guo
2007, 33(2): 101-103.
Abstract:
Application of Underground Monitoring System for Personnel Safety in Laohutai Caoal Mine
LI Zhao-fu, HAN Cun-yu
2007, 33(2): 103-105.
Abstract:
Power Line Carrier Communication System with CDMA Spread Spectrum Technology
GONG Mao-fa, SUN Bo, LIU Peng
2007, 33(2): 106-108.
Abstract:
Research of Travel Control of Mine Hoist and Its PLC Implementatio
BAO Xi-ping, YANG Qing-jiang, LI Ye
2007, 33(2): 108-110.
Abstract: