基于ALWOA-BiLSTM的采空区遗煤氧化温度预测及可解释性分析

Research on predicting coal spontaneous combustion temperature in goaf based on ALWOA-BiLSTM

  • 摘要: 为更准确地捕捉采空区遗煤温度的时变规律,实现煤自燃温度的精准预测,引入自适应权重和Levy飞行策略改进鲸鱼优化算法(WOA),提出自适应莱维鲸鱼优化算法(ALWOA)。通过四个基准函数验证了ALWOA相较于WOA具有更优的收敛速度和收敛精度。基于此,利用ALWOA优化双向长短期记忆网络(BiLSTM),构建基于ALWOA-BiLSTM的采空区遗煤氧化温度多参数预测模型。以红庆粱煤矿11301工作面O?、CO、CO?、CH?、CO/O?等8个指标作为输入特征,温度作为预测目标,采用80%的数据训练模型、20%的数据测试模型。结果表明:ALWOA-BiLSTM预测模型的平均绝对误差(MAE)、均方根误差(RMSE)和决定系数(R2)分别为0.7208、0.9395和0.8724,预测精度较高;相比BiLSTM和WOA-BiLSTM模型,MAE分别降低25.24%和29.00%,RMSE分别降低13.20%和20.74%,R2分别提升14.97%和10.01%,验证了ALWOA优化BiLSTM模型的有效性。进一步引入SHAP方法对模型进行可解释性分析,全局特征重要性排序显示R1、R2和CO是影响温度预测的关键指标;特征依赖分析揭示R1和R2均存在显著的阈值效应(R1≈1.30,R2≈0.007),超过阈值后对温度的推动效应急剧增强;局部解释直观展示了不同温度状态下各指标的贡献模式。SHAP分析揭示的物理响应机制与煤自燃氧化机理高度吻合,验证了模型学习的物理合理性,为采空区煤自燃的分级预警和精准防控提供了数据驱动的决策支持。

     

    Abstract: To more accurately capture the time-varying patterns of residual coal temperature in goaf and achieve precise prediction of coal spontaneous combustion temperature, this paper introduces an improved Whale Optimization Algorithm (WOA) incorporating adaptive weights and the Levy flight strategy, proposing the Adaptive Levy Whale Optimization Algorithm (ALWOA). The superior convergence speed and accuracy of ALWOA compared to WOA are validated using four benchmark functions. Based on this, ALWOA is utilized to optimize a Bidirectional Long Short-Term Memory network (BiLSTM), constructing a multi-parameter prediction model for residual coal oxidation temperature in goaf based on ALWOA-BiLSTM. Using eight indicators, including O?, CO, CO?, CH?, and CO/O?, from the 11301 working face of Hongqingliang Coal Mine as input features and temperature as the prediction target, the model was trained on 80% of the data and tested on the remaining 20%. The results show that the ALWOA-BiLSTM prediction model achieves a Mean Absolute Error (MAE) of 0.7208, a Root Mean Square Error (RMSE) of 0.9395, and a coefficient of determination (R2) of 0.8724, demonstrating high prediction accuracy. Compared to BiLSTM and WOA-BiLSTM models, the MAE is reduced by 25.24% and 29.00%, the RMSE by 13.20% and 20.74%, and the R2 is improved by 14.97% and 10.01%, respectively, validating the effectiveness of using ALWOA to optimize the BiLSTM model. Furthermore, the SHAP method was introduced for model interpretability analysis. Global feature importance ranking indicates that R1, R2, and CO are the most critical indicators affecting temperature prediction. Feature dependence analysis reveals significant threshold effects for both R1 and R2 (R1≈1.30, R2≈0.007), beyond which their driving effect on temperature intensifies sharply. Local interpretations visually demonstrate the contribution patterns of each indicator under different temperature states. The physical response mechanisms revealed by the SHAP analysis align closely with the mechanisms of coal spontaneous combustion oxidation, verifying the physical rationality of the model's learning and providing data-driven decision support for graded warning and precise prevention and control of coal spontaneous combustion in goaf areas.

     

/

返回文章
返回