基于激光诱导击穿光谱的煤质可解释预测研究

Interpretable prediction of coal quality based on laser-induced breakdown spectroscopy

  • 摘要: 针对激光诱导击穿光谱(LIBS)技术应用于煤质检测时存在的多物理场耦合干扰、基体效应显著、测量精度与重复性不高等问题,结合响应曲面法(RSM)、人工神经网络(ANN)和基于SHapley值的可加性解释方法(SHAP),提出一种基于LIBS的煤质可解释预测方法。构建了兼顾光谱信号质量与稳定性的多目标融合响应函数,设计了三因素三水平试验方案,并采用RSM进行数值分析,建立了LIBS分析系统的关键参数(包括激光能量、激光频率、光谱仪延迟时间)与响应函数的数学回归模型,完成LIBS的系统优化并确定最佳实验条件。采用基线校正、去噪、特征选择及内标等方法进行数据预处理,基于遗传算法(GA)和ANN完成光谱数据建模,并进行结果评估。针对ANN的“黑箱”性质,对所建模型进行SHAP全局可解释与局部验证分析,揭示了模型决策机制与光谱特征对分析指标的非线性作用和贡献规律,从而提升了模型的可解释性与工程可信度。实验结果表明:所建发热量、灰分、水分、挥发分的定量分析模型在测试集上均表现良好,决定系数分别为0.971,0.987,0.975,0.968;均方根误差(RMSE)分别为0.58 MJ/kg,1.23%,0.78%,0.98%;预测结果的重复性限分别为0.10 MJ/kg,0.21%,0.19%,0.24%,均达到GB/T 212—2008《煤的工业分析方法》要求。

     

    Abstract: To address multiphysics coupling interference, pronounced matrix effects, and limited measurement accuracy and repeatability in coal quality analysis using Laser-Induced Breakdown Spectroscopy (LIBS), an interpretable coal quality prediction method was proposed based on LIBS by combining Response Surface Methodology (RSM), an Artificial Neural Network (ANN), and SHapley Additive exPlanations (SHAP). A multi-objective integrated response function accounting for both spectral signal quality and stability was constructed, and a three-factor, three-level experimental design was developed. Numerical analysis using RSM established a mathematical regression model relating key parameters of the LIBS analysis system, including laser energy, laser frequency, and spectrometer delay time, to the response function. The LIBS system was optimized, and optimal experimental conditions were determined. Data preprocessing included baseline correction, denoising, feature selection, and internal standardization. Spectral data were modeled using a Genetic Algorithm (GA) and ANN, and the results were evaluated. To address the black-box nature of ANN, global interpretability analysis and local validation using SHAP were performed on the model. These analyses revealed the model's decision-making mechanism and the nonlinear effects and contributions of spectral features to the analytical indices, thereby enhancing model interpretability and engineering credibility. The experimental results showed that the quantitative models for calorific value, ash content, moisture content, and volatile matter content performed well on the test sets, with Coefficients of Determination of 0.971, 0.987, 0.975, and 0.968, respectively. The Root Mean Square Error (RMSE) values were 0.58 MJ/kg, 1.23%, 0.78%, and 0.98%, respectively. The repeatability limits of the predictions were 0.10 MJ/kg, 0.21%, 0.19%, and 0.24%, respectively, all meeting the requirements of GB/T 212—2008, Methods for Proximate Analysis of Coal.

     

/

返回文章
返回